ADCA Packaged Equipment

ADCA Packaged Equipment -Humidity Separators -Valsteam 2021-06-04T15:41:25+01:00
  • ADCAMAT PUMPS AND PUMP TRAPS
  • HUMIDITY SEPARATORS
  • SAMPLE COOLERS
  • DIRECT STEAM HUMIDIFIERS
  • STEAM INJECTORS
  • STEAM/WATER MIXERS
  • PACKAGED UNITS/SKIDS
  • ADCATHERM HEAT EXCHANGERS
  • BOILER HOUSE EQUIPMENT
  • COMPLEMENTARY EQUIPMENT

HUMIDITY SEPARATORS

humidity separators

S16

The S16 series centrifugal separators remove moisture from steam and compressed air pipelines. Steam and compressed air pass through the separator and, as a result of centrifugal forces, impacts and swirling effects, the particles with a heavier specific gravity, such as water and oil droplets, moisture in suspension, dirt and scale are separated from the fluid. The condensate collected at the bottom of the separator must be automatically drained by suitable steam or compressed air trap.

Sub Models

S16S
S16S

MATERIAL

Carbon steel

SIZES

1/2” to 2”

CONNECTIONS

Female threaded ISO 7 Rp or NPT

RATING

PN 16 and PN 40

S16SS
S16SS

MATERIAL

Stainless steel

SIZES

1/2” to 2”

CONNECTIONS

Female threaded ISO 7 Rp or NPT

RATING

PN 16 and PN 40

adca packaged equipment - humidity separators

S25

The S25 series centrifugal separators remove moisture from steam and compressed air pipelines. Steam and compressed air pass through the separator and, as a result of centrifugal forces, impacts and swirling effects, the particles with a heavier specific gravity, such as water and oil droplets, moisture in suspension, dirt and scale are separated from the fluid. The condensate collected at the bottom of the separator must be automatically drained by suitable steam or compressed air trap.

Sub Models

S25S | PN16 - PN40
S25S | PN16 – PN40

MATERIAL

Carbon steel body

SIZES

DN 15 to DN 300

CONNECTIONS

Flanged EN PN16 or 40
Flanged ASME Class 150 or 300
Threaded ISO 7 Rp or NPT on request

MAX. OPERATING PRESSURE

40 bar

MAX. OPERATING TEMPERATURE

300 ºC

S25S | PN63
S25S | PN63

MATERIAL

Carbon steel body

SIZES

DN 15 to DN 200

CONNECTIONS

Flanged EN PN 63
Flanged ASME Class 600
Socket weld (SW) ASME

MAX. OPERATING PRESSURE

58 bar

MAX. OPERATING TEMPERATURE

300 ºC

S25SS
S25SS

MATERIAL

Carbon steel and zinc plated body

SIZES

DN 15 to DN 300

CONNECTIONS

Flanged EN PN16 or PN40
ASME Class 150 or 300
Threaded ISO 7 Rp or NPT on request

MAX. OPERATING PRESSURE

40 bar

MAX. OPERATING TEMPERATURE

300 ºC

S25 HV and S25 VH
S25 HV and S25 VH

MATERIAL

Stainless steel

SIZES

DN 15 to DN 200

CONNECTIONS

Flanged EN PN16 or PN40
ASME Class 150 or 300
Threaded ISO 7 Rp or NPT on request

MAX. OPERATING PRESSURE

40 bar

MAX. OPERATING TEMPERATURE

300 ºC

sf251s

SF251/S

The SF251/S series centrifugal separators remove moisture from steam and compressed air pipelines. Steam and compressed air pass through the separator and, as a result of centrifugal forces, impact and swirling effects, the particles with a heavier specific gravity, such as water and oil droplets, moisture in suspension, dirt and scale are separated from the fluid. The condensate collected at the bottom of the separator must be automatically drained by suitable steam or compressed air trap.

MATERIAL: Carbon steel body

SIZES: DN 15 to DN 100

CONNECTIONS:

Flanged EN PN16 or PN40
Flanged ASME Class 150 or 300

MAX. OPERATING PRESSURE: 40 bar

MAX. OPERATING TEMPERATURE: 300 ºC

adca packaged equipment - humidity separators

SH25

The SH25/S series horizontal centrifugal separators remove moisture from steam and compressed air pipelines. Steam and compressed air pass through the separator and, as a result of centrifugal forces, impact and swirling effects, the particles with a heavier specific gravity, such as water and oil droplets, moisture in suspension, dirt and scale are separated from the fluid. The condensate collected at the bottom of the separator must be automatically drained by suitable steam or compressed air trap.

MATERIAL: Carbon steel

SIZES: 1/2” to 6”; DN 15 to DN 150

CONNECTIONS:

Flanged EN PN 16 or PN 40
Flanged ASME Class 150 or 300

MAX. OPERATING PRESSURE: 40 bar

MAX. OPERATING TEMPERATURE: 300 ºC

RATING: PN 16 or PN 40

adca packaged equipment - humidity separators

S30S

The S30 series baffle separators remove moisture from steam and compressed air pipelines. Steam and compressed air pass through the separator and, as a result of expansion, impact and swirling effects, the particles with a heavier specific gravity, such as water and oil droplets, moisture in suspension, dirt and scale, are separated from the fluid. The condensate collected at the bottom of the separator must be automatically drained by suitable steam or compressed air trap.

MATERIAL: Carbon steel and zinc plated body

SIZES: DN 15 to DN 300

CONNECTIONS:

Flanged EN PN16 or PN40
Flanged ASME Class 150 or 300
Threaded ISO 7 Rp or NPT on request

MAX. OPERATING PRESSURE: 40 bar

MAX. OPERATING TEMPERATURE: 300 ºC

RATING: PN16 or PN40