BW Technologies Portable Gas Detectors (Multi Gas Restorable) 2020-10-14T16:59:37+01:00

BW Technologies Portable Gas Detectors

Multi Gas Restorable

bw technologies portable gas detectors -GasAlert MAX XT II

GasAlert MAX XT II

Multi gas detector up to 4 gases: O2 (Oxygen), LEL (flammable gases), CO (Carbon Monoxide) and H2S (Hydrogen Sulfide). Sample electric pump integrated with reliable diaphragm technology. Combines straightforward one-button operation with one robust, motorised pump for intelligent, remote sampling, ideal for confined spaces.

Honeywell BW™ Max XT II Multi-Gas Detector
Go the distance, and save.

Honeywell BW™ Max XT II is the smart, simple, economical way to compliance. Workers feel safe and incidents are minimized so everyone will be able to do more. That means savings realized from business continuity and productivity.

With the addition of IntelliFlash™, this multi-gas detector offers continuous visual confirmation of detector operation and compliance.
• Minimize costs and training with one-button operation
• More accurate sampling results with SmartSample pump technology
• Compact, comfortable and field tough

Simple operation, with SmartSample pump.
Honeywell BW™ Max XT II reliably monitors up to four hazards and combines straightforward one-button operation with our robust, motorized pump for intelligent, remote sampling, ideal for confined spaces.

The Honeywell BW™ Max XT II is fully compatible with MicroDock II automated test and calibration system.

TECHNICAL SPECIFICATIONS
SIZE- 5.1 x 2.8 x 2.0 in. / 13.1 x 7.0 x 5.2 cm
WEIGHT- 11.5 oz. / 328 g
OPERATING TEMPERATURE:    -4 to 122ºF / -20 to 50ºC
HUMIDITY- 10 – 100% RH (non-condensing)
ALARMS AND TYPE- Visual, vibrating, audible (95 dB); Low, High, TWA,
                                         STEL, OL (over limit), Low Battery, Pump
SELF-TEST- Audible/visual alarms on activation, sensors, battery, pump and circuitry (continuous)
TYPICAL BATTERY LIFE- 13 hours @ 32ºF / 0ºC
                                                  8 hours @ -4ºF / -20ºC
                                                 Recharges in 6 hours
PUMP DRAW- Sample from up to 75 ft. / 23 m
                            Note: Do not attempt to calibrate a Honeywell BW™ Max XT with tubing
                            longer than the standard calibration tubing supplied with the detector.
USER OPTIONS-

• Confidence beep
• Safety (sensor) lock
• Latching alarms
• Safe display mode
• Calibration IR lock
• Location selection
• Force block test
• Force bump test when overdue
• Force calibration when overdue
• Sensor configuration
• Detector identification
• Low alarm acknowledge
• Language choices (five)
• Set custom start-up message
• Confidence interval
• Datalog interval
RATINGS- EMI/RFI: Complies with EMC Directive 2004/108/EC
INGRESS PROTECTION- IP66/67
CERTIFICATIONS AND APPROVALS-

h: Class I, Div. 1, Gr. A, B, C, D
IECEx: Ga Ex ia IIC T4
ATEX: X g II 1 G Ga Ex ia IIC T4
: Br Ex ia IIC T4
WARRANTY-  Full two year warranty including all sensors

 

SENSOR SPECIFICATIONS
GASES                                                     STANDARD MEASURING RANGE                                                           RESOLUTION
HYDROGEN SULFIDE (H2S)                      0 – 200 ppm                                                                                            1 / 0.1 ppm
CARBON MONOXIDE (CO)                         0 – 1,000 ppm                                                                                         1 ppm
OXYGEN (O2)                                                 0 – 30% vol.                                                                                             0.1% vol.
COMBUSTIBLE GASES (LEL)                    0 – 100% LEL                                                                                          1% LEL
                                                                            0-5.0% v/v                                                                                              0.1% v/v

Alarm setpoints for all sensors are user adjustable. Setpoint(s) are automatically displayed during instrument start-up

FEATURES & BENEFITS

• Integrated sampling pump with reliable diaphragm technology
• Best in class block detection with semi-conductor pressure sensor
• Multi-language support in English, French, German, Spanish and Portuguese
• Conveniently manage your detector with Fleet Manager II
• Equipped with standard datalogging and event logging
• Continuous LCD shows real-time gas concentrations
• Continuous visual compliance with IntelliFlash™
• Compact and lightweight design makes it comfortable to wear
• Water-resistant
• Simple automatic calibration procedure; compatible with MicroDock II automatic test and calibration station
• Full function self-test of sensor, battery status, circuit integrity and audible/visual alarms on start-up
• Bright wide-angled visual alarm bars
• Built-in concussionproof boot
• Compatible with Honeywell BW™ Connect for real time monitoring

OPTIONS AND ACCESSORIES

MicroDock II Compatible
Automatic test and calibration station

Concussion-proof boot

Honeywell BW™ Connect*
Real-Time Monitoring

Multi-unit cradle charger

bw technologies portable gas detectors -GasAlert MICRO5

GasAlert MICRO5

Multi gas detector up to 5 gases among: VOC, CO2, LEL, H2S, CO, O2, SO2, PH3, NH3, NO2, HCN, Cl2, ClO2, O3. Available as either a standard toxic gas model, a PID model for the detection VOCs, or an IR model for CO2 detection. Available in both versions: diffusion detection or with integral motorized pump for remote sampling. Two power options: AA alkaline or rechargeable hot-swappable battery packs.

Series multi-gas detectors

VOCs, CO2, LEL, H2S, CO, O2, SO2, PH3, NH3, NO2, HCN, Cl2, ClO2, O3

Protect yourself
Simultaneously monitor and display up to five atmospheric hazards with the GasAlertMicro 5 Series. Adaptable to a variety of applications, the GasAlertMicro 5 Series has an extensive selection of user-settable field options and is available as either a standard toxic gas model, a PID model for the detection VOCs, or an IR model for CO2 detection.
Use the passcode function to prevent unauthorized modifications of the instrument’s settings. Compatible with BW’s MicroDock II automatic test and calibration system, the GasAlertMicro 5 Series is unparalleled in its versatility, performance and overall value.

• Measure up to five atmospheric hazards concurrently
• Fully customizable to suit any application
• Rapidly switch from diffusion mode to the optional integrated pump in the field

 

Sensors
The GasAlertMicro 5 is available in three models: toxic/electrochemical, PID (for VOCs) or IR (for CO2). 

Electrochemical and catalytic bead sensors available for:
H2S CO O2
SO2 Cl2 ClO2
NH3 PH3 HCN
NO2 O3 Combustibles (LEL)

Photoionization sensor available for volatile organic compounds (VOCs) detection.

Infrared (IR) gold series sensors available for carbon dioxide (CO2) detection.
Note: Due to board and sensor configuration GasAlertMicro 5 models are not interchangeable (i.e. a PID sensor cannot be used in a IR configured unit).

Both the diffusion and pumped configurations are compatible with the MicroDock II automated bump test and calibration system

Standard features of BW products:
• Continuous LCD shows real-time gas concentrations
• Water-resistant
• Automatic calibration procedure; compatible with BW
MicroDock II automatic test and calibration station
• Full function self-test of sensor, battery status, circuit integrity
and audible/visual alarms on start up
• Bright wide-angled visual alarm bars
• Built-in concussion-proof boot

Additional GasAlertMicro 5 Features:
• Integral motorized pump option for remote sampling
• Equipped with internal vibrating alarm for high noise areas
• Two power options: AA alkaline or rechargeable hot-swappable battery packs
• Multi-language support in English, French, German, Spanish and Portuguese

Integral pump and
battery charger

Confined space kit

Belt holster

Collapsible sampling probe

bw technologies portable gas detectors -GasAlert MicroClip

GasAlert MicroClip

Multi gas detector up to 4 gases: O2 (Oxygen), LEL (flammable gases), CO (Carbon Monoxide) and H2S (Hydrogen Sulfide). Small size. One button easy to use. High reliable operation for affordable and cost saving protection. Rating of IP68 for unmatched water protection. (up to 45 minutes at 1,2 m deep). 18-hour battery runtime.
Available with warranty 2 years (XL version) or 3 years (X3 version).

Multi-gas detectors
Small size. Easy to use. Reliable operation. Affordable protection.
With that combination of benefits, it’s no wonder the Honeywell BW™ MicroClip is the world’s most popular multi-gas detector, serving as your trusted companion in hazardous environments — keeping you safe without weighing you down. Plus, it’s the first multi-gas detector with a rating of IP68 for unmatched water protection — up to 45 minutes at a depth of 1.2m. So you can be confident it will stand up to challenging conditions.
Choose from two detectors, both with extended 18-hour battery runtime, one-button operation and Honeywell’s rigorous approach to quality:
Honeywell BW™ MicroClip XL: low up-front cost with a two-year warranty.
Honeywell BW™ MicroClip X3: three-year warranty and a new oxygen sensor that extends overall expected service lifetime to 5 years.
Use our unique advanced technology for safety, compliance and productivity.
• Advanced engineering for reliable battery performance
• Reflex™ Technology to ensure sensor responsiveness
• Compact, lightweight and easy to use — no expertise required
• Flashing green IntelliFlash™ light for compliance at a glance



FEATURES & BENEFITS

• Guaranteed runtime for  at least a 12-hour shift — down to -20°C — without compromising LEL detection of hydrogen, acetylene and other combustible gases
• Durable, rechargeable lithium polymer battery — tested to last in extreme environments
• Ergonomic and wearable — doesn’t weigh you down
• Real-time gas concentrations shown on LCD
• Bright, wide-angle visual alarm bars
• IP68 rating ensures maximum protection against dust and water — up to 45 minutes at a depth of 1.2m
• User-friendly, tamperproof operation with just one button and intuitive LCD icons
• IntelliFlash™ light indicating detector has been bump tested and is monitoring correctly
• Self-test of sensors, battery status, circuit integrity and audible/visual alarms on startup
• Compatible with IntelliDoX docking station for automated bump tests and calibration
• Multi-language support in English, French, German, Spanish and Portuguese
• Device Management with Honeywell SafetySuite
• Compatible with Honeywell BW™ Connect for real time monitoring

Optional Accessories

• Honeywell IntelliDoX Automated Test System
• Honeywell BW™ Connect
• IR connectivity kit
• Five unit cradle charger

For a complete list of kits and accessories, please see Accessories page.

bw technologies portable gas detectors -GasAlert QUATTRO

GasAlert QUATTRO

Multi gas detector up to 4 gases: O2 (Oxygen), LEL (flammable gases), CO (Carbon Monoxide) and H2S (Hydrogen Sulfide). Rugged and reliable. The graphic LCD displays easy to identify icons that indicate operational information. Built-in concussion-proof boot. One-button operation and straightforward user interface minimizes training. Enhanced resistance to common industrial cross sensitive gases such as methanol and ethanol (CO and H2S sensors).

Minimize costs and training with one-button operation
• Field-proven SureCell sensors offer an unprecedented performance in even the harshest environments
• Interchangeable power options with extended battery runtimes for longer shifts

Visual auditing, easy compliance
Rugged and reliable, the GasAlertQuattro four-gas detector combines a comprehensive range of features with simple one-button operation.

With flexible power options, the GasAlertQuattro is always ready. The graphic LCD displays easy to identify icons that indicate operational information, such as bump test and calibration status for simplified onsite auditing.
IntelliFlashTM provides continuous visual confirmation of detector operation and compliance. Suited to a wide range of industrial applications including confined space entry, the GasAlertQuattro is fully compatible with BW’s MicroDock II automatic test and calibration system.

GasAlertQuattro has European Performance Approval and MED.

FEATURES & BENEFITS

Standard features of BW products:
• Continuous LCD shows real-time gas concentrations
• Compact and lightweight design makes it comfortable to wear
• Simple automatic calibration procedure; compatible with BW MicroDock II automatic test and calibration station
• Full function self-test of sensor(s), battery status, circuit integrity and audible/visual alarms on start up and continuous testing on sensor(s)
• Bright wide-angled visual alarm bars
• Built-in concussion-proof boot

Additional GasAlertQuattro features:
• Powered by an interchangeable rechargeable battery pack or alkaline pack with 3 AA batteries
• One-button operation and straightforward user interface minimizes training
• Comprehensive datalogging and event logging capacity
• IntelliFlashTM verifies operation and compliance to both the user and supervisors from up to 20 ft. / 6.1 m
• Enhanced resistance to common industrial cross sensitive gases such as methanol and ethanol (CO and H2S sensors)
• Multi-language support in English, French, German, Spanish and Portuguese
• Field-proven SureCell sensors offer an unprecedented performance in even the harshest environments.