Choke Valves & Manifolds 2020-07-27T10:36:54+01:00

Choke Valves & Manifolds

Quam Hydraulic Actuated Choke - PCH/PDH Series

quam hydraulic actuated choke valve

QUAM Choke Valves issued from an Heavy Duty Design with Easy Maintenance to achieve the High Reliability and the long–life service requested by Oil & Gas Applications.

Our valves are carefully selected considering the specifications, process conditions and using the experience gained by working with these products and applications for many years.

Our status of excellence

  • API–6A Design
  • Heavy Duty Service
  • Wear Resistant Trim
  • Up to 15000 PSI Rating

Hydraulic actuators for choke valves are recommended when especially stiffness and high thrust as well as fast stroking speeds are required. Hydraulic actuators use hydraulic fluid above and below a piston to position the valve travel. An external panel supplies hydraulic pressure. Hydraulic actuators have many designs but piston types are most common.

A typical piston-type hydraulic actuator consists of a cylinder, piston, spring, hydraulic supply, return line, and stem. The piston slides vertically inside the cylinder and separates the cylinder in to two chambers. The upper chamber contains the spring and the lower chamber contains hydraulic oil.

The hydraulic supply and return line is connected to the lower chamber and allows hydraulic fluid to flow to and from the lower chamber of the actuator. The stem transmits the motion of the piston to a valve.

Features
API-6A design
Available styles: positive, needle, disk & cage
Wear resistant trim
Extensive range of body/trim materials and options
Customizable end to end dimension

Benefits
Safe and reliable
Short delivery times
Easy maintenance
Pressure ratings
From ANSI 150 through API 15000 PSI

Applications

Wellheads, Production, Drilling, Heater bypass, Water injection, Gas lift, Blowdown.
Can be installed on Christmas trees, choke and kill manifolds, heaters for oil & gas production.
Can be used for gas pressure and flow rate control, for injection rates and for separators liquid discharge.

Quam Positive Choke - CPB Series

quam positive choke valve

QUAM Choke Valves issued from an Heavy Duty Design with Easy Maintenance to achieve the High Reliability and the long–life service requested by Oil & Gas Applications.

Our valves are carefully selected considering the specifications, process conditions and using the experience gained by working with these products and applications for many years.

Dissipation of well energy in the hardened replaceable beans to meet downstream pressure limitation.
Various sizes and materials are available.

Features
API-6A design
Available styles: positive, needle, disk & cage
Wear resistant trim
Extensive range of body/trim materials and options
Customizable end to end dimension

Benefits
Safe and reliable
Short delivery times
Easy maintenance
Pressure ratings
From ANSI 150 through API 15000 PSI

Applications

Wellheads, Production, Drilling, Heater bypass, Water injection, Gas lift, Blowdown.
Can be installed on Christmas trees, choke and kill manifolds, heaters for oil & gas production.
Can be used for gas pressure and flow rate control, for injection rates and for separators liquid discharge.

Quam Stepping Actuated Choke - PSP/PSH Series

quam stepping actuated choke valve

QUAM Choke Valves issued from an Heavy Duty Design with Easy Maintenance to achieve the High Reliability and the long–life service requested by Oil & Gas Applications.

Our valves are carefully selected considering the specifications, process conditions and using the experience gained by working with these products and applications for many years.

Stepping actuator is driven pneumatically or hydraulically by two separate cylinders and two dedicated solenoids
(one for open and one for close).

Features
API-6A design
Available styles: positive, needle, disk & cage
Wear resistant trim
Extensive range of body/trim materials and options
Customizable end to end dimension

Benefits
Safe and reliable
Short delivery times
Easy maintenance
Pressure ratings
From ANSI 150 through API 15000 PSI

Applications

Wellheads, Production, Drilling, Heater bypass, Water injection, Gas lift, Blowdown.
Can be installed on Christmas trees, choke and kill manifolds, heaters for oil & gas production.
Can be used for gas pressure and flow rate control, for injection rates and for separators liquid discharge.

Quam Plug &Cage Choke - CCM Series

quam plug&cage choke valve

QUAM Choke Valves issued from an Heavy Duty Design with Easy Maintenance to achieve the High Reliability and the long–life service requested by Oil & Gas Applications.

Our valves are carefully selected considering the specifications, process conditions and using the experience gained by working with these products and applications for many years.

Guided plug inside the solid cage for high capacity and erosion control
Noise and vibrations are under control and effects of flashing and high speed are reduced
Trim is enclosed in a cartridge that allows maintenance and replacement of worn parts or trim change with maximum
ease

Features
API-6A design
Available styles: positive, needle, disk & cage
Wear resistant trim
Extensive range of body/trim materials and options
Customizable end to end dimension

Benefits
Safe and reliable
Short delivery times
Easy maintenance
Pressure ratings
From ANSI 150 through API 15000 PSI

Applications

Wellheads, Production, Drilling, Heater bypass, Water injection, Gas lift, Blowdown.
Can be installed on Christmas trees, choke and kill manifolds, heaters for oil & gas production.
Can be used for gas pressure and flow rate control, for injection rates and for separators liquid discharge.

Quam Rotating Disks Choke - CMA Series

quam rotating disks choke valve

QUAM Choke Valves issued from an Heavy Duty Design with Easy Maintenance to achieve the High Reliability and the long–life service requested by Oil & Gas Applications.

Our valves are carefully selected considering the specifications, process conditions and using the experience gained by working with these products and applications for many years.

Two disks with multiple ported holes, top plate rotating to vary the size of the orifice and controlling the well fluid,
resistant to sand and well debris.
Rotating disk produce near linear flow characteristics that is ideal for control application.

Features
API-6A design
Available styles: positive, needle, disk & cage
Wear resistant trim
Extensive range of body/trim materials and options
Customizable end to end dimension

Benefits
Safe and reliable
Short delivery times
Easy maintenance
Pressure ratings
From ANSI 150 through API 15000 PSI

Applications

Wellheads, Production, Drilling, Heater bypass, Water injection, Gas lift, Blowdown.
Can be installed on Christmas trees, choke and kill manifolds, heaters for oil & gas production.
Can be used for gas pressure and flow rate control, for injection rates and for separators liquid discharge.

Quam Sleeve & Cage Choke - PCM Series

quam sleeve&cage choke valve

QUAM Choke Valves issued from an Heavy Duty Design with Easy Maintenance to achieve the High Reliability and the long–life service requested by Oil & Gas Applications.

Our valves are carefully selected considering the specifications, process conditions and using the experience gained by working with these products and applications for many years.

Flow directed to deviate at the center of flow cage away from the body, protecting valve from erosion.
Sealing surface is located on the outside on the cage, lowering the erosion potential

Features
API-6A design
Available styles: positive, needle, disk & cage
Wear resistant trim
Extensive range of body/trim materials and options
Customizable end to end dimension

Benefits
Safe and reliable
Short delivery times
Easy maintenance
Pressure ratings
From ANSI 150 through API 15000 PSI

Applications

Wellheads, Production, Drilling, Heater bypass, Water injection, Gas lift, Blowdown.
Can be installed on Christmas trees, choke and kill manifolds, heaters for oil & gas production.
Can be used for gas pressure and flow rate control, for injection rates and for separators liquid discharge.

Quam Needle & Seat Choke - CNA Series

quam needle&seat choke valve

QUAM Choke Valves issued from an Heavy Duty Design with Easy Maintenance to achieve the High Reliability and the long–life service requested by Oil & Gas Applications.

Our valves are carefully selected considering the specifications, process conditions and using the experience gained by working with these products and applications for many years.

Tapered movable plug controls orifice size precisely, and adjusts to the required bean size. Considered most suitable when gradual halt in flow is required, and at other points where a small flow rate is desired.
Control over a range of production requirements and keeps the well flowing safely and economically.

Features
API-6A design
Available styles: positive, needle, disk & cage
Wear resistant trim
Extensive range of body/trim materials and options
Customizable end to end dimension

Benefits
Safe and reliable
Short delivery times
Easy maintenance
Pressure ratings
From ANSI 150 through API 15000 PSI

Applications

Wellheads, Production, Drilling, Heater bypass, Water injection, Gas lift, Blowdown.
Can be installed on Christmas trees, choke and kill manifolds, heaters for oil & gas production.
Can be used for gas pressure and flow rate control, for injection rates and for separators liquid discharge.

Quam Pneumatic Actuated Choke - PSP/PDP Series

quam pneumatic actuated choke valve

QUAM Choke Valves issued from an Heavy Duty Design with Easy Maintenance to achieve the High Reliability and the long–life service requested by Oil & Gas Applications.

Our valves are carefully selected considering the specifications, process conditions and using the experience gained by working with these products and applications for many years.

Choke valve with a single acting spring return or double acting pneumatic actuator directly installed on top of the
valve, with fail safe power bank.
Tailor made control system with positioners are required for a better and safe control.

Features
API-6A design
Available styles: positive, needle, disk & cage
Wear resistant trim
Extensive range of body/trim materials and options
Customizable end to end dimension

Benefits
Safe and reliable
Short delivery times
Easy maintenance
Pressure ratings
From ANSI 150 through API 15000 PSI

Applications

Wellheads, Production, Drilling, Heater bypass, Water injection, Gas lift, Blowdown.
Can be installed on Christmas trees, choke and kill manifolds, heaters for oil & gas production.
Can be used for gas pressure and flow rate control, for injection rates and for separators liquid discharge.

Quam Electrical Actuated Choke - PCE Series

quam electrical actuated choke valve

QUAM Choke Valves issued from an Heavy Duty Design with Easy Maintenance to achieve the High Reliability and the long–life service requested by Oil & Gas Applications.

Our valves are carefully selected considering the specifications, process conditions and using the experience gained by working with these products and applications for many years.

Electric motor drives choke valve with manual override handwheel, and allows well flowing to adjusts the orifice size.

Features
API-6A design
Available styles: positive, needle, disk & cage
Wear resistant trim
Extensive range of body/trim materials and options
Customizable end to end dimension

Benefits
Safe and reliable
Short delivery times
Easy maintenance
Pressure ratings
From ANSI 150 through API 15000 PSI

Applications

Wellheads, Production, Drilling, Heater bypass, Water injection, Gas lift, Blowdown.
Can be installed on Christmas trees, choke and kill manifolds, heaters for oil & gas production.
Can be used for gas pressure and flow rate control, for injection rates and for separators liquid discharge.

Quam Choke Manifolds

Choke Manifolds

Quam choke manifolds are used on wells drilling or testing.

These manifolds can control the well kick, adjust balance pressure, avoid pollution of oil layer, improve the speed of drilling and control blowout effectively.

A customized production consisting in Choke Valves, Slab or Expanding Gate Valves, piping and fittings ideal for flow control and precise pressure.

Choke Manifold is an assembly which consist of high-pressure valves and chokes, used for reducing the pressure from the well head. It is operated by opening and closing an adjustable or fixed choke.

Features

All components are designed and manufactured according to API-6A specification

Valve sizes range from 2 1/16’’ to 5 1/8’’

Pressure Ratings range from 2000 PSI to 15000 PSI

Special design, ideal to control and contain wellhead
pressures

Available an extensive range of materials, connections and
accessories

Applications

Wellheads, Production, Drilling, Heater bypass, Water injection, Gas lift, Blowdown.
Can be installed on Christmas trees, choke and kill manifolds, heaters for oil & gas production.
Can be used for gas pressure and flow rate control, for injection rates and for separators liquid discharge.