The Doble TDR9100 Circuit Breaker Analyzer is a state-of-the-art circuit breaker test set for testing all types of circuit breakers with efficient and accurate performance measurements.
The TDR9100 provides measurements for main and auxiliary contact timing, mechanical motion analysis, analog values, resistance and capacitance.
Use this inclusive, rugged and field-portable instrument for simple and complex testing of circuit breakers.
The TDR9100 controls circuit breaker trip and close commands and supports the following operations: Trip (O), Close (C), Reclose (O-0.3s-C), Tripfree (CO), O-CO, O-0.3s-CO, First Trip (O), Slow Close (C).
Features
- Features up to 4 breaks per phase, 3 motion channels and 6 event channels
- Testing Flexibility – the TDR9100 can be ganged as a set of 2 or 3 units effectively doubling or tripling your usable channels and main contacts for up to 12 breaks per phase
- User-friendly T-Doble Software features an intuitive control panel for quick, efficient and simple testing of circuit breakers
- Measure additional parameters in the mechanism cabinet using Doble or 3rd party transducers
Benefits
- Know that your breakers can and will perform when they are needed
- Easily detect main contact and resistor contact timing errors
- A patented digital rotary and linear transducer provide early diagnosis of mechanical problems
- Immune to Interference – the accuracy of test results is unaffected by the severe conditions of electrostatic and electromagnetic interference that are normally present in harsh substation environments.
- Control with a Doble Universal Controller (DUC), tablet or PC
T-Doble Software
- Control and operate your TDR9100 to make and compare breaker timing measurements, validate time of operation, and verify manufacturer specifications
- Operate, record and maintain specified tests and their respective files
- Create and manage circuit breaker test plans
- Plot, overlay, analyze and print data
- Maintain test plan library for families of circuit breakers and associated mechanisms
The Doble TDR900 is your entry-level, portable circuit breaker test set.
It operates and records a circuit breaker’s contact timing, motion, velocity, main contact engagement & synchronization, trip and close coil initiation and currents.
Use the TDR900 to verify control circuit, check motion of moving parts, validate time of operation and demonstrate results of circuit breaker maintenance.
Features
- Monitor breakers with up to 4 breaks per phase with motion measurements
- Detect main and pre-insertion resistor engagement and timing on all 12 channels
- Record up to three analog and three digital customer definable parameters
- Create and manage custom circuit breaker test plans with T-Doble software
- Measure additional parameters in the mechanism cabinet using Doble or 3rd party transducers
Benefits
- Know that your breakers can and will perform when they are needed
- Easily detect main contact and resistor contact timing errors
- Control with a Doble Universal Controller (DUC), tablet or PC
T-Doble Software
- Control and operate your TDR900 to make and compare breaker timing measurements, validate time of operation, and verify manufacturer specifications
- Operate, record and maintain specified tests and their respective files
- Create and manage circuit breaker test plans
- Plot, overlay, analyze and print data
- Maintain test plan library for families of circuit breakers and associated mechanisms
Digital Circuit Breaker Analyzer
MODEL: CT-8000 S3
The CT-8000 S3 is Vanguard’s fourth generation EHV circuit breaker analyzer. The CT-8000 S3 is available with 3 (part number 9103-UC) or 6 contact timing channels (part number 9104-UC). The Vanguard CT-8000 S3 can fully analyze a circuit breaker’s performance by measuring the main contact and resistor contact time, stroke, velocity, over-travel, bounce back and contact wipes. Also, an outstanding feature of the CT-8000 S3 is the ability to perform dynamic resistance tests on circuit breaker contacts.
FEATURES & BENEFITS
- Fully analyze circuit breaker’s performance by measuring main contact and resistor contact time, stroke, velocity, over-travel, bounce back and contact wipes
- Perform dynamic contact resistance test
- USB computer interface
- USB Flash drive interface (Flash drive not included)
- Store up to 200 test records and 100 test plans internally
- Initiate Breaker Operation
- Built-in 4.5″ wide Thermal Printer
- Rugged “QWERTY” style membrane keypad
- Optional “On-line” Timing Mode
- Optional dual ground testing mode
- Optional Bluetooth wireless computer interface
CABLES
| [8000-0005] USB Cable [ 6′ (1.83m) ] | 8000-0005 |
| [8000-0016] Power + Ground Combination Cable | 8000-0016 |
| [8000-0097] Contact Extension Cable [ 30′ (9.14m) ] | 8000-0097 |
| [8000-0099] Initiate Cable [ 22′ (6.71m) ] | 8000-0099 |
| [8000-0101] Test Lead (Trigger, V1, V2) [ 2′ (0.61m) ] | 8000-0101 |
| [8000-0102] Analog Transducer Cable | 8000-0102 |
| [8000-0104] Transducer Cable [ 25′ (7.62m) ] | 8000-0104 |
| [8000-0174] CT-7000 S3/8000 S3 Contact Cable (4 pin, 20′) | 8000-0174 |
| [8000-0175] CT-7000 S3/8000 S3 Contact Extension Cable (4 pin, 30′) | 8000-0175 |
| [8000-0213] CT-8000 S3 Current/Sense Cable Set | 8000-0213 |
TECHNICAL SPECIFICATION
| TYPE | Portable circuit-breaker analyzer |
| PHYSICAL SPECIFICATIONS | 16”W x 11”H x 14”D (40.6 cm x 29.9 cm x 35.6 cm); Weight: 22 lbs (9.98 kg) |
| INPUT POWER | 100-240Vac, 10A, 50/60Hz |
| DRY-CONTACT INPUTS | 3 channels (9103-UC) or 6 channels (9104-UC). Channel can detect the main contact and resistor contact time. |
| TIMING WINDOWS | 1 second, 10 seconds, or 20 seconds |
| TIMING RESOLUTIONS | ±50 micro-seconds @ 1 sec. duration, ±500 micro-seconds @ 10 sec. duration, ±1.0 milli-seconds @ 20 sec. duration |
| TIMING ACCURACY | 0.05% of reading ±0.05 ms @ 1 second duration |
| DRY-CONTACT CHANNEL PROTECTION | All contact inputs are grounded until test. Input channels are also protected against static discharge. |
| DRY-CONTACT DETECTION RANGE | Closed: Less than 20 Ohm. Opened: greater than 5000 ohm |
| INSERTION RESISTOR DETECTION RANGE | 50 – 5,000 ohms |
| TRIGGER INPUT VOLTAGE | Open/Close trigger voltage: 24 V – 300V DC or peak AC |
| VOLTAGE SENSING INPUT RANGE | V1: analog input; 0 – 250 V DC or peak AC; sensitivity ±1 V; record and print voltage level V2 and V3: voltage presence/absence detector input; 24 – 255 V DC or peak AC; record and print 3 timing events |
| BREAKER OPERATIONS | Initiate Open, Close, Open-Close, Close-Open, Open-Close-Open |
| BREAKER INITIATE CAPACITY | 30A, 250 Vac/dc max |
| INITIATE CURRENT READING RANGE | one, non-contact, Hall-effect sensor, 0 – 20 amp range, dc to 5 Khz AC |
| DIGITAL TRAVEL TRANSDUCER INPUTS | 3 digital travel transducer channels; linear range: 0.0 – 60.0 in (±0.01 in) rotary range: 0 – 360 degrees (±0.36 degrees) |
| RESISTOR TYPE TRANSDUCER INPUTS | 3 channels, 200 ohm – 10K ohms |
| CONTACT TRAVEL POINT DIFFERENCE | measures “slow-close” contact-point distances; results can be printed |
| DYNAMIC/STATIC RESISTANCE RANGE | 0.1 – 1,999 micro-ohms; accuracy: ±2% of reading, ±5 micro-ohms |
| RESISTANCE TEST CURRENT | 200 amperes max |
| DISPLAY | back-lit LCD screen (128 x 240 pixels); viewable in bright sunlight and low light |
| PRINTER | built-in 4.5” wide thermal printer that can print both graphic contact travel waveforms and tabulated test results |
| INTERNAL TEST RECORD STORAGE | Store upt to 200 test records and 100 test plans |
| EXTERNAL TEST RECORD STORAGE | USB Flash drive interface for external storage of test records and test plans |
| COMPUTER INTERFACES | One USB port, optional Bluetooth wireless interface |
| PC SOFTWARE | Windows® based Breaker Analysis software included with purchase price |
| CABLES | furnished with full set of test leads |
| OPTIONS | transportation cases (available for the CT-8000 S3 and travel transducers), on-line timing mode, dual ground testing mode, bluetooth interface |
| SAFETY | designed to meet UL 6101A-1 and CAN/CSA C22.2 No 1010.1-92 standards |
| ENVIRONMENT | Operating: -10°C to +50°C (+15°F to +122°F); Storage: -30°C to +70°C (-22°F to +158°F) |
| HUMIDITY | 90% RH @ 40°C (104°F) non-condensing |
| ALTITUDE | 2,000 m (6,562 ft) to full safety specifi cations |
| WARRANTY | one year on parts and labor |
| Specifications are valid at nominal voltage and ambient temperature of +25˚C (+77˚F). |
Digital Circuit Breaker Analyzer
MODEL: CT-7000 S3
The CT-7000 S3 is Vanguard’s fourth generation EHV circuit breaker analyzer. The CT-7000 S3 is available with 3 (part number 9021-UC) or 6 contact timing channels (part number 9100-UC). The CT-7000 S3 can fully analyze a circuit breaker’s performance by measuring the main contact and resistor contact time, stroke, velocity, over-travel, bounce back and contact wipes. Both contact and motion analysis can be performed on all circuit breaker operations (OPEN, CLOSE, OPEN-CLOSE, CLOSE-OPEN, and OPEN CLOSE-OPEN). The CT-7000 S3’s timing window is selectable between 1 second, 10 seconds, and 20 seconds.
FEATURES & BENEFITS
- Fully analyze circuit breaker’s performance by measuring main contact and resistor contact time, stroke, velocity, over-travel, bounce back and contact wipes
- USB computer interface
- USB Flash drive interface (Flash drive not included)
- Store up to 200 test records and 100 test plans internally
- Initiate Breaker Operation
- Built-in 4.5″ wide Thermal Printer
- Rugged “QWERTY” style membrane keypad
- Optional “On-line” Timing Mode
- Optional dual ground testing mode
- Optional Bluetooth wireless computer interface
TECHNICAL SPECIFICATION
| TYPE | Portable circuit-breaker analyzer |
| PHYSICAL SPECIFICATIONS | Dimensions: 21.5”W x 8”H x 14” D (53 cm x 20 cm x 35 cm) Weight: 15 lbs (6.8 Kg) |
| INPUT POWER | 100-240Vac, 3A, 50/60Hz |
| DRY-CONTACT INPUTS | 3 channels (9021-UC) or 6 channels (9100-UC). Channel can detect the main contact and resistor contact time. |
| TIMING WINDOWS | 1 second, 10 seconds, or 20 seconds |
| TIMING RESOLUTIONS | ±50 micro-seconds @ 1 sec. duration, ±500 micro-seconds @ 10 sec. duration, ±1.0 milli-seconds @ 20 sec. duration |
| TIMING ACCURACY | 0.05% of reading ±0.05 ms @ 1 second duration |
| DRY-CONTACT CHANNEL PROTECTION | All contact inputs are grounded until test. Input channels are also protected against static discharge. |
| DRY-CONTACT DETECTION RANGE | Closed: Less than 20 Ohm. Opened: greater than 5000 ohm |
| INSERTION RESISTOR DETECTION RANGE | 50 – 5,000 ohms |
| TRIGGER INPUT VOLTAGE | Open/Close trigger voltage: 24 V – 300V DC or peak AC |
| VOLTAGE SENSING INPUT RANGE | V1: analog input; 0 – 250 V DC or peak AC; sensitivity ±1 V; record and print voltage level V2 and V3: voltage presence/absence detector input; 24 – 255 V DC or peak AC; record and print 3 timing events |
| BREAKER OPERATIONS | Initiate Open, Close, Open-Close, Close-Open, Open-Close-Open |
| BREAKER INITIATE CAPACITY | 30A, 250 Vac/dc max |
| INITIATE CURRENT READING RANGE | one, non-contact, Hall-effect sensor, 0 – 20 amp range, dc to 5 Khz AC |
| DIGITAL TRAVEL TRANSDUCER INPUTS | 3 channels, 200 ohm – 10K ohms |
| CONTACT TRAVEL POINT DIFFERENCE | measures “slow-close” contact-point distances; results can be printed |
| DISPLAY | back-lit LCD screen (128 x 240 pixels); viewable in bright sunlight and low light |
| PRINTER | built-in 4.5” wide thermal printer that can print both graphic contact travel waveforms and tabulated test results |
| INTERNAL TEST RECORD STORAGE | Store up to 200 test records and 100 test plans |
| EXTERNAL TEST RECORD STORAGE | USB Flash drive interface for external storage of test records and test plans |
| COMPUTER INTERFACES | One USB port, optional Bluetooth wireless interface |
| PC SOFTWARE | Windows® based Breaker Analysis software included with purchase price |
| CABLES | furnished with full set of test leads |
| OPTIONS | transportation cases (available for the CT-7000 S3 and travel transducers), on-line timing mode, dual ground testing mode, bluetooth interface |
| SAFETY | designed to meet UL 6101A-1 and CAN/CSA C22.2 No 1010.1-92 standards |
| ENVIRONMENT | Operating: -10°C to +50°C (+15°F to +122°F); Storage: -30°C to +70°C (-22°F to +158°F) |
| HUMIDITY | 90% RH @ 40°C (104°F) non-condensing |
| ALTITUDE | 2,000 m (6,562 ft) to full safety specifi cations |
| WARRANTY | one year on parts and labor |
EHV Circuit Breaker Analyzer
MODEL: DIGITMR S2
The Vanguard DIGITMR S2 is an inexpensive, easy to use digital circuit breaker analyzer. The DIGITMR S2 can be operated stand-alone or can be computer-controlled. It can fully analyze a circuit-breaker’s performance by testing the contact time, stroke, velocity, over-travel, and contact wipe. Contact and motion analysis can be performed for all breaker contact operations (Open, Close, Open – Close, Close – Open, and Open – Close – Open). Timing results are recorded and displayed on the 240 x 128 pixels back-lit LCD screen and can also be printed on the built-in 4.5″ wide thermal printer.
FEATURES & BENEFITS
- Stand-alone, microcomputer-driven EHV Circuit Breaker Analyzer
- Analyzes contact time, stroke, velocity, over-travel, and contact wipe
- USB PC interface
- USB Flash drive interface
- Can store up to 200 test records and 100 test plans
- Built-in thermal printer
TECHNICAL SPECIFICATION
| TYPE | portable digital circuit breaker analyzer |
| PHYSICAL SPECIFICATIONS | 18.5”W x 14”H x 7”D (47.0 cm x 35.7 cm x 17.6 cm); Weight: 20 lbs (9.1 kg) |
| INPUT POWER | 3 Amps, 100 – 240 Vac, 50/60 Hz |
| DRY-CONTACT INPUTS | 3 dry-contact channels; each channel detects main contact and insertion resistor contact |
| TIMING WINDOWS | 1-second, 10-seconds, or 20-seconds |
| TIMING RESOLUTIONS | ±50 micro-seconds @ 1-second duration, ±500 micro-seconds @ 10-second duration, ±1.00 milli-second @ 20-second duration |
| TIMING ACCURACY | 0.05% of reading ±0.1 ms @ 1-second duration |
| CONTACT DETECTION RANGE | Closed: less than 20 ohms; Open: greater than 5,000 ohm |
| RESISTOR DETECTION RANGE | 50 – 5,000 ohms |
| TRIGGER INPUT VOLTAGE | Open/Close: 30 – 300V, DC or peak AC |
| VOLTAGE SENSING INPUT RANGE | V1: analog input; 0 – 255V, DC or peak AC; Sensitivity: ±1V V2: voltage presence/absence detector input; 30 – 300V, DC or peak AC |
| BREAKER OPERATIONS | Initiate Open, Close, Open – Close, Close – Open, Open – Close – Open |
| BREAKER INITIATE CAPACITY | 30A, 250 Vac/dc max |
| INITIATE CURRENT READING RANGE | One, non-contact, Hall-effect sensor, 0 – 20 amp range, dc to 5Khz |
| TRAVEL TRANSDUCER INPUT | 1 digital travel transducer channel; Linear range: 0.0 – 60.0 in (±0.005 in.); Rotary range: 0 – 360 degrees (±0.006 degrees) |
| CONTACT TRAVEL POINT DIFFERENCE | Measures “slow-close” contact-point distances; results can be printed |
| CT CURRENT SENSOR | One, non-contact, 0 – 100A |
| DISPLAY | Back-lit LCD screen (240 x 128 pixels); viewable in bright sunlight and low light levels |
| PRINTER | Built-in 4.5-inch wide thermal printer can print both graphic contact travel waveforms and tabulated test results |
| INTERNAL TEST RECORD STORAGE | Stores up to 200 test records and 100 test plans |
| COMPUTER INTERFACES | One USB port, optional Bluetooth interface |
| PC SOFTWARE | Windows®-based Vanguard Circuit Breaker Analysis (VCBA S2) software is included with purchase price. Software updates available at no additional charge. |
| SAFETY | Designed to meet UL/IEC 61010 and CAN/CSA C22.2 No. 1010.1-92 standards |
| ENVIRONMENT | Operating: -10°C to 50° C (15°F to +122° F); Storage: -30° C to 70° C (-22°F to +158° F) |
| OPTIONS | Transportation case (available for the DigiTMR S2 and the travel transducers) |
| WARRANTY | One year on parts and labor |
| Specifications are valid at nominal voltage and ambient temperature of +25˚C (+77˚F). |
Digital Circuit Breaker Analyzer
MODEL: CT-3500 S2
PART NUMBERS
9002-UC [CT-3500 S2]
The Vanguard CT-3500 S2 is the second generation, stand-alone, digital, microprocessor-controlled, circuit-breaker timer. It measures the elapsed time from the instant a breaker coil is energized to the instant of opening or closing of a circuit-breaker’s dry contacts. In addition to timing a breaker’s contact response time, the CT-3500 S2 can also time relays or other switching functions that use an initiating trigger voltage (24-300 Volts DC or AC). The timer-triggering voltage starts three independent electronic timers. Each timer is individually stopped by its respective dry-contact closing or opening. The CT-3500 can fully analyze the timing of all circuit breaker operations (Open, Close, Open – Close, and Close – Open). Timing results are displayed in milli-seconds and cycles on the unit’s back-lit LCD screen and can be printed on the built-in 2.5-inch wide thermal printer.
FEATURES & BENEFITS
- Detect Main & Insertion Resistor Contacts on same input
- USB computer interface
- USB Flash drive interface (Flash drive not included)
- Store 128 test records internally
- Initiate Breaker Operation
- Built-in 2.5″ wide Thermal Printer
- Rugged “QWERTY” style membrane keypad
TECHNICAL SPECIFICATION
| TYPE | Portable circuit-breaker analyzer |
| PHYSICAL SPECIFICATIONS | 16”W x 7”H x 13” D (40.6 cm x 17.4 cm x 33 cm); Weight: 14 lbs. (6.4 Kg) |
| INPUT POWER | 100 – 240 Vac, 50/60 Hz |
| DRY-CONTACT INPUTS | 3 channels |
| TRIGGER INPUT VOLTAGE | open/close: 24 – 300 V, DC or peak AC |
| BREAKER OPERATIONS | Open, Close, Open-Close, Close-Open |
| TIMING RESOLUTION | ±0.1 millisecond; accuracy: 0.05% of reading ±0.1 ms |
| DISPLAY | back-lit LCD screen (128 x 64 pixels); viewable in bright sunlight and low light conditions |
| KEYPAD | rugged, 44-key “QWERTY” membrane keypad |
| PRINTER | built-in 2.5-inch wide thermal printer |
| INTERNAL TEST RECORD STORAGE | stores up to 128 timing records |
| COMPUTER INTERFACE | one USB PC interface, one USB Flash drive interface |
| COMPUTER SOFTWARE | Windows® based Breaker Analysis software included with purchase price |
| SAFETY | designed to meet IEC61010 (1995), UL61010A-1, CSA-C22.2 standards |
| ENVIRONMENT | Operating: -10°C to +50°C (+15°F to +122°F) Storage: -30°C to +70°C (-22°F to +158°F) |
| HUMIDITY | 90% RH @ 40°C (104°F) non-condensing |
| ALTITUDE | 2,000 m (6,562 ft) to full safety specifications |
| CABLES | furnished with full set of test leads (inluding 20-foot contact leads and 30-foot contact lead extensions) |
| OPTIONS | transportation case |
| WARRANTY | one year on parts and labor |
CABLES
| Cable | Part Number |
|---|---|
| [8000-0005] USB Cable [ 6′ (1.83m) ] | 8000-0005 |
| [8000-0016] Power + Ground Combination Cable | 8000-0016 |
| [8000-0095] Contact Extension Cable [ 30′ (9.14m) ] | 8000-0095 |
| [8000-0096] Contact Test Lead [ 20′ (6.10m) ] | 8000-0096 |
| [8000-0098] Trigger Cable [ 15′ (4.57m) ] | 8000-0098 |
250 A Molded Case Circuit Breaker Tester
MODEL: MCCB-250
The Vanguard MCCB-250 is a programmable, high-current source designed specifically for testing molded-case circuit breakers, thermal magnetic and solid-state overload motor-protection relays.
FEATURES & BENEFITS
- 4 current-source outputs (i.e., 5 A @ 120 Vac, 25 A @ 24 Vac, 120 A @ 6 Vac, 250 A @ 3 Vac)
- 4-line by 20-character LCD display
- Provides external current input (0-10 A)
TECHNICAL SPECIFICATION
| TYPE | 250 Ampere current source |
| PHYSICAL SPECIFICATIONS | 16.8”W x 12.6”H x 10.6”D (42.6 cm x 32.0 cm x 27.0 cm); Weight: 46 lbs (21 kg) |
| INPUT POWER | 100 – 120 Vac or 200 – 240 Vac (factory pre-set), 50/60 Hz |
| OUTPUT CURRENTS | 0 – 5 A @ 120 Vac max; 0 – 25 A @ 24 Vac max; 0 – 120 A @ 6 Vac max; 0 – 250 A @ 3 Vac max; Instantaneous current: 700A |
| INTERNAL CURRENT METER | 100 mA – 1000 A; Accuracy: 1% of reading ±20mA |
| MEASUREMENT METHOD | Isolated CT |
| EXTERNAL METER RANGE | 10 mA – 10 A; Accuracy: 1% of reading, ±2mA |
| MEASUREMENT METHOD | Isolated CT |
| TIMER READING RANGE | 1ms – 2 hours; Accuracy: 0.1% of reading ±1ms |
| TIMER STOP INPUTS | Voltage input (24V – 300V, DC or peak AC), dry contact input, or removal of primary current |
| DISPLAY | Back-lit LCD Screen (20 characters by 4 lines); viewable in bright sunlight and low-light levels |
| COMPUTER INTERFACE | RS-232C port for factory calibration and diagnostics |
| SAFETY | Designed to meet IEC61010 (1995), UL61010A-1, CSA-C22.2 standards |
| ENVIRONMENT | Operating: -10˚C to 50˚ C (15˚F to +122˚ F); Storage: -30˚ C to 70˚ C (-22˚F to +158˚ F) |
| CABLES | Power cord, ground cable, 10-foot #2 AWG test leads |
| OPTIONS | Transportation case |
| WARRANTY | One year on parts and labor |
| Specifications are valid at nominal voltage and ambient temperature of +25˚C (+77˚F). |
CABLES
| Cable | Part Number |
|---|---|
| [8000-0016] Power + Ground Combination Cable | 8000-0016 |
| [8000-0086] 10′ (3.05m) Current Cable Set (#4 AWG) | 8000-0086 |
| [8000-0089] 10′ (3.05m) Current Cable (#10 AWG) | 8000-0089 |
| [8000-0090] Timer + Sense Cable Set [ 10′ (3.05m) ] | 8000-0090 |
Doble Motion/Travel Transducers
(Include 40’ cable and bag)
- TR3190 – Digital Combination Rotary & Linear Motion Transducer – adaptable to 80% of current circuit breakers in service today
- TR3170 – Digital Gold Rotary Transducer – when only a rotary transducer package is necessary
- TR3171 – Specifically designed for ABB AHMA 4/8 Mechanisms
- TR3186 – Specifically designed for ABB HMB 4/8 Mechanisms
- TR3189 – Specifically designed Linear Transducer for ABB HMB 4/8/11 Hydraulic Mechanisms
Mechanical Adapters
The following mechanical adapters are used with the TR3190 Motion/Travel Transducers
- TR3173 – GE Air Magnetic Adapter (specify 13-kv or 4-kv)
- TR3174 – GE Air Magnetic Adapter (2000+ amperes)
- TR3175 – HVB-IPO Adapter with Spacer
- TR3176 – HVB Ganged Operator Adapter
- TR3177 – General Purpose Tank Adapter
- TR3178 – HVB-IPO Spacer
- TR3179 – GE VB-1
- TR3180 – ABB HPL Insulator Column
- TR3181 – ABB HPL Mechanism Cabinet
- TR3185 – Universal Mechanical Transducer Mounting
- TR3187 – Bell Crank Translator
- TR3188 – Alstom T155/2 GIS Breaker
The following mechanical adapters are used with the TR3170 Motion/Travel Transducers
- TR3172 – Westinghouse SFA
- TR3182 – GEC HFG SF6
- TR3183 – Coupling 8mm Internal Thread
- TR3184 – Westinghouse SF Mechanical Interface
- TR3185 – Universal Mechanical Mounting Kit
- TR3187 – Bell Crank Translator
Cables
- T9940 – Event/Analog Cable Kit (3 shielded analog/3 unshielded event, 28’ total length, w/termination clip kit)
- T9950 – Analog Cable Kit (6 shielded analog, 28’ total length, w/termination clip kit)
- T9960 – First Trip Cable and Current Probe Kit (6 shielded analog, 28’ total length, with termination clip kit, 3 -10 A small AC Current Probes and 1 – Doble AC/DC Clip-On Current Probe)
- T9920 – O.C.B. Cable (60’ total length, longer lengths available)
- T9930 – E.H.V. Cable Set (60’ total length, longer lengths available)
- Doble AC/DC Clip-On Current Probe – recording currents on mechanism on analog channels
- Plug Safety Flag – for utilizing the Record Mode with TDR instruments in place of Safety Switch
- Heavy Duty Mobile Transportation Cases – available upon request
CBA 3000 allows any timing test, motion and speed analysis, multiple contemporary static and dynamic contact resistance measurements, both sides grounded (BSG) tests, undervoltage condition test and more. All these functions are integrated in a single lightweight test case without the need of connecting additional external modules.
Main features
- Faster: one single connection set up to perform automatically all possible Circuit Breaker tests
- Safer: Both Sides Grounded feature without any additional external boxes/modules
- Up to 6 static and dynamic contact resistance measurement – 200A DC output each
- Three phase first trip measurement
- 16 or 24 fully user configurable Main/PIR and auxiliary input contacts
- 2, 4 or 6 Open / Close coil commands
- 3 analog linear/rotary transducers and 3 digital transducers inputs for travel/speed analysis
- 8 analog input measurements: battery voltage, motor current, pressure transducers and other measurements
- Minimum voltage trip coil test, fully automatic
- On-screen control and test results evaluation
- TDMS software suite for analysis, archiving and test report creation
- Library of standard test plans available with the test sets
Tests performed
- CB open time
- CB close time
- CB pole discordance
- CB coil current
- CB motor current
- CB motor power analysis
- CB first trip
- CB static contact resistance
- CB dynamic contact resistance
- CB motion analysis
- CB SF6 pressure
Complementary Equipment
TDMS 7
Software
CBA 2000 diagnostic system is designed to grant the highest accuracy while testing circuit breaker. It can perform static and dynamic contact resistance measurement and it’s a precise timing speed and motion analyzer. Circuit breaker timing test set CBA 2000 is the perfect solution when a complete and reliable diagnostics has to be performed on circuit breakers.
Main features
- Designed for the complete test of all circuit breakers
- Built-in 200 A microhmmeter – static and dynamic contact resistance measurement
- 12 auxiliary timing inputs
- Up to 4 trip/close coils control
- Up to 18 main and 18 resistive contact inputs
- Digital transducer option for motion analysis
- Minimum Trip Voltage Test (optional)
- Stand alone functionality – no PC connection is required
- Analysis and result evaluation directly on the display
- Internal memory for up to 500 test results and 64 pre-defined test plans
Tests performed
- CB open time
- CB close time
- CB pole discordance
- CB coil current
- CB motor current
- CB first trip
- CB static contact resistance
- CB dynamic contact resistance
- CB motion analysis
- Minimum trip coil
Complementary Equipment
TDMS 7
Software
CBA 1000 circuit breaker timing test equipment is a reliable and very accurate operating device for the maintenance and commissioning of circuit breakers in medium and high voltage substation. It can perform static and dynamic contact resistance measurement and it’s an accurate timing speed and motion analyzer.
Main features
- Circuit Breaker timing test set suitable for EHV, HV and MV circuit breakers
- Built-in 200 A microhmmeter – static and dynamic contact resistance measurement
- 6 main and 6 resistive contact inputs
- Up to 4 trip/close coils control
- 7 analog inputs
- 4 auxiliary timing contact
- Cross trigger for the synchronization of up to 4 CBA 1000
- Stand alone functionality – no PC connection is required
- Analysis and result evaluation directly on the display
- Internal memory for up to 250 test results and 64 pre-defined test plans
- USB and RS232 ports
Tests performed
- CB open time
- CB close time
- CB pole discordance
- CB coil current
- CB motor current
- CB static contact resistance
- CB dynamic contact resistance
- CB motion analysis
- Minimum trip coil
Complementary Equipment
TDMS 7
Software
DC voltage power supply unit
The DC voltage power supply models GECC3000 and GECC 1500 are designed for supplying the DC voltage and current for testing any type of system which requires an high-power, ripple free DC power supply
Main features
- Designed for supplying DC voltage and current for the testing of circuit breaker, DC motors and protection systems
- Powerful output up to 3.3 KW (GECC 3000) or up to 1.65 KW (GECC 1500)
- 250 V DC output@13,5 A
- 125 V DC output@27 A
- Ripple free power supply
- Lightweight: only 9,5 Kg.
Test and Data Management Software
TDMS 7 is a powerful software package providing data management for acceptance and maintenance testing activities. Electrical apparatus data and test results are saved in the TDMS 7 database for historical results analysis.
TDMS 7 software organizes test data and results for the majority of electrical apparatus tested with ISA test sets and related software.
TDMS 7 software controls and provides data acquisition for:
- DRTS 66
- DRTS 64
- DRTS 34
- DRTS 33
- DRTS 6
- DRTS 3+
- T 1000+
- TD 1000+
- RELTEST 1000
- STS 5000
- STS 4000
- STS 3000 light
- T 2000
- T 3000
- CBA 3000
- CBA 2000
- CBA 1000
- BTS 200
- eKAM
TDMS 7 software is also a powerful database. It allows to create an electrical network with substations, feeders and the majority of electrical apparatus, such as:
- Protective Relays
- Instrument transformers
- Power transformers
- Circuit Breakers
- Energy Meters
- Transducers
- Power Quality Meters
- Ground Grids
- Batteries