The dial level indicator has been designed for the level measurement of liquids in small and high tanks. Its operation is based on a clock gears movement of highest precision that assure a local indication with high accuracy and repeatability.
DIAL LEVEL INDICATOR
Two mechanisms have been planned in order to have two reading scale with single or double pointer. The instrument doesn’t need any electrical supply. The main characteristics are the reliability and the strength.
For periodically checking the accuracy of other service gauges or pressure operated instruments and for precision measures of pressure.
A permanent magnet incorporated in the float actuates the sensing elements mounted in the special waterproof case, causing them to rotate 180°.
MAGNETIC LEVEL INDICATOR
These elements, which are treated with special paints of contrasting color on the two faces, show the red color faces when the level increases (float going up) and the white faces when the level decreases (float going down), thus showing very clearly the position of the float and hence the liquids’ level.
MLTG series SMART visual reed transmitters are microprocessor based instruments that combine the 4-20mA+ HART® signal advantages (4-20mA) together with the convenience of local visualization of measurement by means of graduated scale.
SMART VISUAL LEVEL TRANSMITTER
They can be remotely configured by a universal hand held terminal (HHT) or by a PC with a dedicated interface. Moreover, it is possible to locally configure the instruments by means of 4 pushbuttons and to display the data on the wide LCD display or on the local graduated scale.
MN04 series pressure gauges are tools combined with a separation membrane which, undergoing the pressure of the process fluid, activate the movement.
MN07 gauges, are accurate instrument suitable to satisfy the hardness working conditions and the most severe requirements of the various industrial sectors for which have been designed.
MN11 gauges, are accurate instrument suitable to satisfy the hardness working conditions and the most severe requirements of the various industrial sectors for which has been designed.
Reflex indicators display the fluid level through a transparent surface being part of a column that is connected to the vessel by on-off cock gauges.
REFLEX LEVEL INDICATOR
The measuring part is composed of one or more elements from prismatic borosilicate glass (crystal) which trigger the reflection or non-reflection of the environmental light depending on whether the inner surface comes or does not come into contact with the fluid or with the gas (vapor). The crystal is tightened to the inside of a steel box by means of bolts. Its sturdy construction and its good visibility, without using dedicated illuminators, make it ideal for use in heavy-duty applications with pressure up to 400 bars and temperature up to 427° C.
For various types of applications. Differential pressure measurement with a high differential pressure overload and/or high working pressures (static pressures), also in aggressive ambient for gaseous, liquid, viscous and aggressive media.
DIFFERENTIAL PRESSURE GAUGE
Monitoring and control of pumps filter monitoring level measurement in closed tanks.
This gauge is particularly recommended for application with gases, where tube spring failure can instantly multiply internal pressure.
SOLID FRONT TUBE SPRING PRESSURE GAUGE
The blow-out back is constructed to vent such pressure while the solid front between tube spring and dial prevents forward pressure release, leaving the laminated safety glass intact. With this gauge the safety of operator is increased.
This type of indicators display the level of the fluid through a transparent surface, being part of a column that is connected to the vessel by on-off cock gauges. They are composed of one or more opposed pairs from smooth borosilicate glass (crystal) that are tightened inside a steel box.
TRANSPARENT LEVEL INDICATOR
The level reading is based on a different transparency of the fluid and the gas or vapor. In heavy-duty applications, the glass is protected by means of a mica shield, which however reduces the reading transparency. To remedy this phenomenon, special illuminators are used which exploit the total refraction / reflection effect in the fluid / gas or vapor separation surface. Reflection indicators are successfully used up to 250 bars and with temperatures up to 538° C.
To these industrial type bimetal thermometers, with a cylindrical spiral sensing element, are peculiar characteristics, solidity , simplicity and the shape follow UNI and other international standards.
Gas filled thermometers cover a wide temperature range (from -200 °C up to 700 °C).
GAS FILLED THERMOMETER
Their construction can grant full protection of personnel and process from accidental contamination, as the filling gas is Nontoxic, suitable in the food, pharmaceutical, chemical and petrochemical industries.