Novotest NDT Instruments (Coating testing) 2020-10-30T15:48:41+01:00

Coating Testing Instruments

novotest coating testing instruments- Tensile Adhesion Tester NOVOTEST AC-4624

Tensile Adhesion Tester NOVOTEST AC-4624

Adhesion is the tendency of dissimilar particles or surfaces to cling to one another. In the field of quality testing, adhesion of coatings to the base material, such as: paints, plastic, epoxy mixtures, sprayed metal, laminate to wood and other metal and polymer coatings, is most often measured.

novotest coating testing instruments- Cross Cut Adhesion Tester NOVOTEST AN-2409

Cross Cut Adhesion Tester NOVOTEST AN-2409

Cross Cut Adhesion Tester is designed to comply with: ISO 16276-2, ISO 2409, DIN 53151, ASTM B 335, ASTM D 3002, BS 3900-E6, BS EN ISO 2409, NF T 30-038.

novotest coating testing instruments- Cross Hatch Adhesion Plate NOVOTEST AH-16276

Cross Hatch Adhesion Plate NOVOTEST AH-16276

The instrument is designed to measure the adhesion value of coatings in compliance with ISO 16276-2 and ASTM D 3359.

novotest coating testing instruments- Bitumen And Mastic Insulation Adhesion Tester NOVOTEST CM-4219

Bitumen And Mastic Insulation Adhesion Tester NOVOTEST CM-4219

Adhesion tester CM-4219 is a device for measuring the adhesion value of bitumen pipe insulation and other insulating coatings which are based on bitumen.

Peel Adhesion Tester NOVOTEST AP-4219

Adhesion tester AP-4219 is designed to measure the adhesive strength value of the coatings on different structures, as well as to determine the adhesion value of polymeric insulating tapes which are generally used for pipes insulation. Adhesion tester AP-4219 is reliable and easy in operation.

novotest coating testing instruments- Density Cup NOVOTEST PYCNOMETER P-2811

Density Cup NOVOTEST PYCNOMETER P-2811

The method of measuring of the density consist of determining the mass of tested material, which is placed to the container (pycnometer) of  known volume at a certain temperature. To calculate the density the obtained weight divided  by volume of tested liquid.

novotest coating testing instruments- Viscosity Flow Cup NOVOTEST VZ

Viscosity Flow Cup NOVOTEST VZ

An important parameter of lubricants, paints and other liquids is viscosity. This parameter characterizes the ability of materials to resist the movement of one part relative to another. Viscosity Flow Cup NOVOTEST VZ is a device for determining the conditional viscosity of Newtonian fluids.

Also for express testing of hot liquids or monitoring the state of the liquid in operation, there is a Viscosity Flow Cup submersible type

novotest coating testing instruments- Viscosity Dip Cup NOVOTEST VZ-P

Viscosity Dip Cup NOVOTEST VZ-P

Viscosity Dip Cup NOVOTEST VZ-P is used for the rapid testing of the conditional viscosity of a large batch of products where it is necessary to evaluate viscosity as quickly as possible. It can also be used for liquids in use (oil baths of moving parts), hot liquids and others, where the use of Viscosity Cup in the standard version may be difficult.

novotest coating testing instruments- Viscosity Dip Mug NOVOTEST VMS

Viscosity Dip Mug NOVOTEST VMS

Viscosity Dip Mug is used to determine the convectional viscosity of the dispersion polyvinyl-acetate homopolymers coarse dispersion.

Dew Point Meter NOVOTEST KTR-1

Dew Point Meter NOVOTEST KTR-1 is designed for rapid non-destructive measurement the temperature, humidity, dew point calculation and measurement of the surface temperature by contact method.

Coating Thickness Gauge NOVOTEST TP-1M

Coating Thickness Gauge NOVOTEST TP-1M is a thickness gauge for measuring the thickness of various coatings on metals, and with connected specialized probes to the device, user can measure the temperature and humidity of air, surface temperature, calculate the dew point, and also measure the depth of grooves or surface roughness.
novotest coating testing instruments- Coating Thickness Knife Tester NOVOTEST TPN-2808

Coating Thickness Knife Tester NOVOTEST TPN-2808

Coating Thickness Knife Tester NOVOTEST TPN-2808 (Paint Inspection Gauge) is designed to measure the thickness of both single and multiple layer coatings on any grounds, both metallic and non-metallic.

novotest coating testing instruments- Pinhole Detector NOVOTEST ED-3D

Pinhole Detector NOVOTEST ED-3D

NOVOTEST ED-3D Pinhole Detector was designed for rapid non-destructive testing of the continuity of coating (e.g. porosity of film) with thickness up to 500mkm according to ASTM G62-A.

Pulse Holiday Detector NOVOTEST SPARK-1

Pulse Holiday Detector NOVOTEST SPARK-1 is a device for detecting defects (thinning, microholes, cracks, etc.) in dielectric coatings on metals.

novotest coating testing instruments- Analog Surface Profile Gauge NOVOTEST LIMIT

Analog Surface Profile Gauge NOVOTEST LIMIT

Description:

Mechanical depth gauge of focal corrosion.

novotest coating testing instruments- Digital Surface Profile Gauge NOVOTEST SP-1M

Digital Surface Profile Gauge NOVOTEST SP-1M

Digital Surface Profile Gauge NOVOTEST SP-1M is designed for profile measuring on either flat or curved surfaces.

novotest coating testing instruments- Film Applicator NOVOTEST AU-823

Film Applicator NOVOTEST AU-823

Film applicator AU-823 is designed for applying layers of paint and other materials of required thickness of the layer during the complex tests according to ASTM D 823-E.

Grindometer NOVOTEST M-1524

Grind gauges are used to determine particle size and fineness of grind. The tested materials are paints, chocolates, inks, coating materials and so on.

novotest coating testing instruments- Buchholz Coating Hardness Tester NOVOTEST BH-2815

Buchholz Coating Hardness Tester NOVOTEST BH-2815

Buchholz Coating Hardness Tester NOVOTEST BH-2815 is used for hardness measurements of coating’s using the indentation method (bevelled disc of stainless steel block with constant test load of 500g.).
novotest coating testing instruments- Pencil Hardness Tester NOVOTEST PH-3363

Pencil Hardness Tester NOVOTEST PH-3363

The instrument is designed to determine the hardness of coatings by pencil leads in compliance with: ASTM D 3363, ECCA T4, EN 13523-4, ISO 15184:2012, JIS K 5600-5-4.
novotest coating testing instruments- Scratch Hardness Coating Tester NOVOTEST SH-1518

Scratch Hardness Coating Tester NOVOTEST SH-1518

Scratch Hardness Coating Tester NOVOTEST SH-1518 (ball type) is used for hardness testing of coatings (paint, mastic, plastic and others) through determining the hardness resistance to indentation of the ball tip diameter of 1 mm.
novotest coating testing instruments- Scratch Adhesion Tester NOVOTEST C1-5178

Scratch Adhesion Tester NOVOTEST C1-5178

Device is used for determining the adhesion and resistance to damage by scratching in according to ASTM D 2197 “Method of determining the adhesion of organic coatings through scratching”.

The device complies with the requirements ISO 12137-1, ASTM D 5178, ASTM D 2197.

novotest coating testing instruments- Erichsen Cupping Tester NOVOTEST SE-1520

Erichsen Cupping Tester NOVOTEST SE-1520

Erichsen stamp is designed to determine the elasticity and strength of coatings with a bowl-shaped bend (hood coverage for the Erichsen) in compliance to ISO 1520.
novotest coating testing instruments- Impact Tester NOVOTEST STRIKE UNIVERSAL

Impact Tester NOVOTEST STRIKE UNIVERSAL

Impact Tester NOVOTEST STRIKE UNIVERSAL has a multipurpose design and consists of a stand (with a pipe fixed to it with a scale and a clamping device) and an impact device according to the required standard.

Impact Tester NOVOTEST STRIKE-U4219

Impact Tester NOVOTEST STRIKE-U4219 is intended for testing the strength of coatings upon impact on pipelines during their installation and operation.

novotest coating testing instruments- Bending Coating Tester NOVOTEST BEND-H1519

Bending Coating Tester NOVOTEST BEND-H1519

The instrument measures the elasticity, flexural strength of coatings through rounding the tested sample on the set of cylindrical rods which diameters are from 1 mm to 20 mm.

novotest coating testing instruments-Bending Coating Mandrel Tester NOVOTEST BEND-H1500

Bending Coating Mandrel Tester NOVOTEST BEND-H1500

The instrument measures the elasticity, flexural strength of coatings through rounding the tested sample on the set of cylindrical rods which diameters are from 6 mm to 25 mm.

novotest coating testing instruments- Bending Coating Tester NOVOTEST BEND-M1519

Bending Coating Tester NOVOTEST BEND-M1519

The device allows to measure the elasticity and strength of coatings through bending the metal plate with tested coating applied around a set of cylindrical rods with diameters of rods from 2 mm to 32 mm (other diameters on request).

Bending Test Conical Mandrel NOVOTEST BEND-6860

The NOVOTEST BEND-6860 is used to determine the elasticity or resistance, adhesion and elongation of coatings on sheet metal in accordance with ISO 6860, ASTM D 522-A, BS 3900-E11, ECCA T7.