Protective Relay and Primary Injection Test Set

Protective Relay and Primary Injection Test Set 2021-07-05T15:40:45+01:00

Single Phase Test Set

MODEL: F8200

doble protection relay test equipment - F8200

A compact instrument perfect for single-phase testing, use the F8200 Power System Simulator for testing single-phase conventional schemes, digital protection systems, and more.

This four-module F8000-series instrument is available in four standard configurations of HVA Current, HVA Voltage, and Low-Density Logic I/O modules.

  • Ideal for single-phase electromechanical or microprocessor relay testing
  • Allows testing of 3-phase directional voltage
  • Suitable for testing digital substations and hybrid digital-analog scheme testing
  • Parallel amplifiers to inject single high-current for single-phase tests
  • Highly-portable and rack-mountable

Three Phase Test Set

MODEL: F8300

Doble protection relay testing equipment - F8300

A do-it-all instrument designed for three-phase testing with expanded possibilities, use the F8300 for testing three-phase conventional schemes and digital protection systems.

This seven-module F8000-series instrument is available in five standard configurations of HVA Current, HVA Voltage, and Low-Density Logic I/O modules.

Ideal for:

  • Differential testing with 3 phases of 300 V L-N & 6 currents
  • Generation station testing with 4 phases of 150 V L-N
  • Robust transmission scheme testing and transformer differential with 4 phases of 150 V L-N, 8 programmable logic I/O, 6 currents
  • Ph-Ph transformer protection testing with 12 logic I/O, 4 voltages at 150 V, 4 currents
  • Transformer differential testing with 4 phase at 150 V for testing transmission protection

Power System Simulator

MODEL: F6150e

doble power system simulator - f6150e

The Doble F6150e is a versatile protective relay tester for testing relays and schemes.

This power system simulator performs the simplest through the most complex tests. Meeting all your protective relay testing needs, the F6150e is available in different configurations.

Whether you need to test a specific component or test an entire scheme, the F6150e is the proven solution to assess protection system performance.

  • Performs standard relay calibration and verification testing of high burden and microprocessor relays
  • Analog testing of 1A and 5A protection devices
  • Performs state simulation and transient testing
  • Tests 0.2-class metering CTs and transducers
  • Implements end-to-end testing of communications-based schemes with GPS time syncing
  • Maximum of 12 sources (six voltage, six current) configurable for bench testing and proof-of-concept testing for complicated relaying schemes
  • Delivers full VA power with resistive, inductive and capacitive loads at maximum current rating (6×35, 3×70, 1×210 amps)
  • Control all sources from a tablet device for basic, manual protection testing
  • Select from a number of protective relay tester models that feature varying power levels and complexity. Choose the best solution according to your testing and budgetary requirements.
  • Rugged construction and proven state-of-the art design provide laboratory accuracy with uncompromising field performance
  • Convenient front-panel display indicates active voltage/current amplitudes and phase values during testing
  • High-precision measurements for energy meter and transducer testing

Protection Software

protection software testing - doble

What types of protection testing functions do you need? Which types of devices are you testing?

Doble provides a complete range of software solutions for all types of applications. Perform manual and automated testing on all types of protective devices and schemes – and organize this critical information in databases with robust reporting capabilities needed to meet your testing practices and regulatory requirements. Customize the types of software solutions you need throughout your organization.

Power System Simulator

MODEL: F6150sv

doble protection testing equipment - f6150sv

The Doble F6150sv protective relay test equipment is a versatile solution for testing IEC 61850-based protection devices and schemes.

This power system simulator performs the simplest through the most complex tests. The F6150sv has the highest output current of any test set on the market – all within a single box.

Meeting all your testing and budgetary needs, the F6150sv is available in different configurations.

The F6150sv tests IEC 61850-based systems at the process-bus level and station-bus level using both sampled values and GOOSE messages.

  • Simulate three streams of IEC 61850 9-2LE sampled values through one fiber-optic port and one copper (RJ45) port (F6870 Sampled Values option required)
  • Wi-Fi capable (optional)
  • Simulates (publishes) and subscribes to IEC 61850 GOOSE messages involving multiple IEDs (F6860 GSE Configurator option required)
  • Performs standard relay calibration and verification testing of high burden (electromechanical), solid-state, and microprocessor-based relays
  • Delivers full VA power with resistive, inductive and capacitive loads at maximum current rating. The following ranges are available with the F6005 Enhanced Rating Option: (6 x 35, 3 x 70, 1 x 210 A).
  • Performs state simulation and transient testing
  • Tests 0.2-class metering CTs and transducers
  • Select from a number of instrument models that feature various power levels and complexity. Choose the best solution according to your testing and budgetary requirements.
  • Rugged construction of our protective relay test equipment and proven state-of-the art design provide laboratory accuracy with uncompromising field performance
  • Convenient front-panel display indicates active voltage/current amplitudes and phase values during testing

Protection Software

protection software testing - doble

What types of protection testing functions do you need? Which types of devices are you testing?

Doble provides a complete range of software solutions for all types of applications. Perform manual and automated testing on all types of protective devices and schemes – and organize this critical information in databases with robust reporting capabilities needed to meet your testing practices and regulatory requirements. Customize the types of software solutions you need throughout your organization.

Protective Relay Test System

MODEL: MTS-5100

The MTS-5100 is an all-in-one relay test set with a direct front panel interface for all functions, without exception.

The ideal integrated system for testing and calibration of protection and control relays, simulation of power system phenomena, and verification of voltage, current, phase, and power transducers.

FEATURES OF MTS-5100

  • Large 10.1” display
  • Six AC/DC Currents
  • Four AC/DC Voltages
  • 12 Contact / 0-250Vrms Voltage inputs
  • Four contact outputs
  • Transducer voltage/input
  • GPS input (antenna included)
  • IRIG input, IRIG output
  • IEEE 61850 GOOSE messaging

Request a quote

Portable Relay Test Set

MODEL: RFD-200 S3

Request a quote

The RFD-200 S3 is a portable relay test set that delivers performance verification testing of electromechanical, electronic, and microprocessor-based protective relays in their operating installations. The RFD-200 S3 is a rugged test set suitable for testing a variety of protection relays operated in both indoor and outdoor environments. The unit’s ergonomic design and intuitive control panel layout make it ideal for first-time users who have little or no training.

FEATURES & BENEFITS

  • A built-in Timer displays contact time in both cycles and milliseconds
  • AC current source with 3 outputs (10A, 40A, 100A)
  • Set of NO/NC dry contacts that change state when a test is initiated
  • AC voltage source for testing relays up to 250 Vac
  • DC Voltage source (0 – 300 Vdc)
  • Volt meter input (0 – 600 V input range)
  • Three power supplies (24 Vdc, 48 Vdc, 124 Vdc)
  • Built-in power resistors

Primary Current Injection

MODEL: PCI-600

Request a quote

The VIC Model PCI-600 is a programmable, high-current source that is designed specifically for utility-substation applications. This alternating current(ac) test device is used primarily for injection testing of protective relays. This same device can also be used for testing thermal, magnetic and solid-state motor-protection relays and molded-case circuit breakers.

The PCI-600 is versatile and can also be used in many other applications that require a high-current source.

FEATURES & BENEFITS

  • Results displayed on a 4-line by 20-character backlit LCD
  • Test currents from 10 to 600 amperes
  • Also has an external-current input (0-10 A)

RELATED PRODUCTS

MTS-1010 and MTS-1030

MTS-1010 and MTS-1030 Multi-function power meters are portable, digital meters developed specifically for power related applications in the relay, metering and Instrumentation & Control departments

find more

Panel Meter & Transducer Tester

The MTS-2000 is a highly-portable instrument for testing and calibrating transducers and panel meters.