Tecnos S.R.L Gas Detectors
ACCESSORIES
ADAPTOR
RAS, DUST and PARK series head flow adaptor for calibration and test.
Complete with quick connector.
AUTOMATIC OR MANUAL CONTROL VALVE
0,3 lt/min control valve with pressure indicator.
Coupling 5/8″ u16 (C19)
CABLE GLANDS
ATEX 3/4″ NPT cable gland for RAS model detectors.
Available for armoured and non armoured cables.
COLLECTOR CONE
Stainless steel collector cone for light gas, diam. 30 cm.
Also available for remote test and calibrations.
COMPLETE TEST AND CALIBRATION KIT
Test & Calibration KIT: The Kit consists of a Polypropylene toolbag including: two canisters of gas mixture (34lt @ 34bar) containing calibration gas at specific concentration, control valve for canister with pressure indicator, calibration adapter for gas detector, 30 cm polyurethane pipe and magnet for calibration.
DUCTS ADAPTOR KIT
Ducts adaptor kit for ducts with internal pressure higher than ambient pressure, composed by fixing plate, pipe, connection, gas detectors head adaptor.
DY MAGNET
Calibration and/or thresholds setting magnet for RAS/DY series gas detectors
ENOSEBLU2
Gas detectors configuration software complete with connection cable RS485/USB.
Zero and Span remote calibration function
Alarm history display.
Data logger function up to 32 detectors.
GAS CANISTER
Aluminium “NON REFILLABLE” canister containing sample gas at known concentration for gas detectors Bump Test and Calibration.
Available 34 litres at 34 bar (capacity 1 litre) or 58 litres at 34 bar (capacity 1,7 litres).
Regulator coupling 5/8” U16 (C10).
JB-485 JUNCTION BOX
Plastic or aluminium alloy junction box complete with internal pin terminal for the distribution of the signal RS-485 and power supply.
Also available with driver for regeneration of RS-485 signal.
MOUNTING BRACKET
Aluminium alloy RAS detectors mounting bracket.
Dimensions 125x18mm, fixing holes wheelbase 108mm.
Available in stainless steel.
REMOTE DISPLAY
Remote display for gas detectors, power supply 12-24Vdc with 4-20mA input, display 2 lines x 8 digits visualizing the real time concentration read.
N.3 relays outputs (warning, alarm, fault) + 4-20mA repeating output towards the central unit.
SPLASH DEFLECTOR
Splash deflector protection.
Available for RAS and DUST series gas detectors.
SUCTION PUMP
Suction pump rated from 0,25 to 4,00 litres/min. integrated in aluminium box complete with flow indicator.
4-20mA output proportional to the sucked flow and second 4-20mA proportional to the sucked flow temperature.