Complementary Equipment
CDV32
The CDV32 condensate drain valve automatically discharges air and condensate from steam systems during start-up. A compression spring keeps the valve open when the system is not pressurized. As soon as the operating pressure reaches the closing pressure to which the CDV is set, the valve closes. If the operating pressure drops below the closing set pressure, the spring force will cause the CDV32 to open once again.
MATERIAL
Carbon steel
SIZES
1/2” to 3/4”; DN 15 to DN 20
CONNECTIONS
Female threaded ISO 7 Rp or NPT
Flanged EN 1092-1 PN 40
Flanged ASME B16.5 Class 150 or 300
Socket weld (SW) ASME B16.11
Butt weld (BW) ASME B16.25 on request
MAX. OPERATING PRESSURE
22 bar
MAX. OPERATING TEMPERATURE
250 ºC
FLOW RATE CAPACITY
Up to 780 kg/h
VB21M
The VB21 vacuum breakers are simple and reliable devices that automatically relieve or “break” an unwanted vacuum condition, restoring the atmospheric pressure. This device is particularly suitable for steam heated units of small and medium volume, such as heat exchangers, heating coils, calorifiers, jacketed kettles, steam boilers, etc.
DF
The ADCA DF series are compact noise diffusers designed to disperse the high-speed discharge from steam or air traps, dampening the noise levels and reducing erosion. These devices are typically installed downstream of intermittent steam traps, such as thermodynamic or inverted bucket, which are generally associated with high-speed blast discharges. Noise reductions greater than 80% can be expected when measured at 1 meter away from the source.
MATERIAL
Stainless steel
SIZES
1/2” to 1”
CONNECTIONS
Threaded ISO 7 Rp
MAX. OPERATING PRESSURE
32 bar
MAX. OPERATING TEMPERATURE
250 ºC
BDV
The BDV, AFZ and HVV vent valves are designed to drain (blowdown) or vent (depressurize) pipework, steam traps, valves and others.
BDV – Blowdown valves – Manual discharge of strainer screen contents and generally to be used as a drain and/or depressurization valve.
MATERIAL
Stainless steel
SIZES
3/8” and M22
CONNECTIONS
NPT-M
Threaded ISO 228 G
Metric fine pitch
MAX. OPERATING PRESSURE
42 bar
MAX. OPERATING TEMPERATURE
400 ºC
HVV
The BDV, AFZ and HVV vent valves are designed to drain (blowdown) or vent (depressurize) pipework, steam traps, valves and others.
HVV – Hand vent valves – Venting of float traps and generally to be used as a vent or depressurization valve.
AFZ
The BDV, AFZ and HVV vent valves are designed to drain (blowdown) or vent (depressurize) pipework, steam traps, valves and others.
AFZ – Anti-freeze device – Automatic discharge of condensate from steam traps, valves, pipelines and others, to prevent the condensate from freezing.
UTT-100
The UTT – Ultrasonic Trap Tester is a battery-powered instrument that gives a visible and audible indication of ultrasonic frequencies. It provides easy, accurate leak detection and mechanical inspection through advanced ultrasonic technology. Before you begin testing, it is advisable to familiarize yourself with the basic components of your kit.