- ADCAMAT PUMPS AND PUMP TRAPS
- HUMIDITY SEPARATORS
- SAMPLE COOLERS
- DIRECT STEAM HUMIDIFIERS
- STEAM INJECTORS
- STEAM/WATER MIXERS
- PACKAGED UNITS/SKIDS
- ADCATHERM HEAT EXCHANGERS
- BOILER HOUSE EQUIPMENT
- COMPLEMENTARY EQUIPMENT
ADCAMAT PUMPS AND PUMP TRAPS

POPS
The ADCAMAT POP (Pressure Operated Pump), fabricated in carbon steel (stainless steel on request), is recommended in the transfer of high-temperature liquids such as condensate, oils and others, to a higher elevation or pressure. Under certain conditions, it can drain a closed vessel under vacuum or pressure. The pump can be operated by steam, compressed air or other gases, and can be used for lifting any kind of non-corrosive liquids.
Sub Models

POPS | DN 25 – 80
MATERIAL
Carbon steel
SIZES
DN 25 ; DN 40 ; DN 50 ; DN 80 x 50
CONNECTIONS
Flanged EN PN16
Threaded ISO 7 Rp
MAX. MOTIVE PRESSURE
10 bar
FLOW RATE CAPACITY
6080 kg/h

POPS | DN 100
MATERIAL
Carbon steel
SIZES
DN 100 x 100
CONNECTIONS
Flanged EN PN16
Threaded ISO 7 Rp
MAX. MOTIVE PRESSURE
10 bar
FLOW RATE CAPACITY
29800 kg/h

POPS-K
The POPS-K packaged pump units can be used to lift or displace hot condensate and other liquids even in hazardous areas.
Sub Models
POPS-K – Simplex
A POPS-K packaged unit is comprised by an ADCAMat pump, a vented receiver and all auxiliary items, compactly mounted on a metal frame, piped and ready for connection. Packaged units save time, work and site costs. In addition, they ensure that the installation of the pump is correct in every detail.
POPS-K – Duplex
A POPS-KD (Duplex) packaged unit is comprised by two ADCAMat pumps in parallel, a vented receiver and all auxiliary items, compactly mounted on a metal frame, piped and ready for connection
POPS-K – Triplex
A POPS-KT (Triplex) packaged unit is comprised by three ADCAMat pumps in parallel, a vented receiver and all auxiliary items, compactly mounted on a metal frame, piped and ready for connection.

POP-LC
The ADCAMAT POP-LC (Pressure Operated Pump) is recommended in the transfer of high-temperature liquids such as condensate, oils and other liquids to a higher elevation or pressure. The pump starts when there is something to pump and stops when there isn’t. Under certain conditions, it can drain a closed vessel under vacuum or pressure. The pump can be operated by steam, compressed air or gas and can be used for lifting any kind of non-corrosive liquids.
MATERIAL: Carbon and stainless steel
SIZES: DN 25 LC, DN 40 LC, DN 40 x 25 LC
CONNECTIONS: Flanged EN PN16
Threaded ISO 7 Rp
Others on request
MAX. MOTIVE PRESSURE: 10 bar

PPT14
The ADCAMat PPT14 automatic pump trap is especially recommended where stall condition may occur due to poor steam trap condensate discharge capacity, caused by temporary insufficient pressure drop. The equipment combines the features of a float steam trap and a pressure operated pump, in one single unit.
MATERIAL: Carbon and stainless steel
SIZES:
11/2” x 1” and 2” x 11/2”
DN 40 x 25 and DN 50 x 40
CONNECTIONS:
Flanged EN PN 16 and ASME Class 150
Threaded ISO 7 Rp

APST
The ADCAMAT APST (Automatic Pump and Steam Trap) is especially recommended where a stall condition may occur due to poor steam trap condensate discharge, caused by temporary insufficient differential pressure. The equipment has the features of a float steam trap combined with a pressure operated pump in the same unit.
MATERIAL: Carbon and stainless steel
SIZES:
DN 40 x 40 – DN 50 x 50; 11/2 x 11/2”; 2” x 2”
CONNECTIONS:
Flanged EN PN16
Threaded ISO 7 Rp
Others on request
MAX. MOTIVE PRESSURE: 10 bar
FLOW RATE CAPACITY: 3910 kg/h
RATING: PN16

PPA312
The ADCAMAT PPA series is recommended in the transfer of high-temperature liquids such as condensate, oils and others, to a higher elevation or pressure. Under certain conditions, it can drain a closed vessel under vacuum or pressure. The pump can be operated by steam, compressed air or gas and can be used for lifting any kind of non-corrosive liquids.
MATERIAL: Carbon steel
SIZES: DN 50 x 50 – DN 80 x 50
CONNECTIONS:
Flanged EN PN16
Flanged ASME Class 150
Special flanges on request
MAX. ALLOWABLE PRESSURE: 16 bar
MAX. MOTIVE PRESSURE: 10 bar
MAX. ALLOWABLE TEMPERATURE: 250 ºC

PPA14
The ADCAMAT PPA (Pressure Operated Pump) is recommended in the transfer of high-temperature liquids such as condensate, oils and others, to a higher elevation or pressure. Under certain conditions, it can drain a closed vessel under vacuum or pressure. The pump can be operated by steam, compressed air or other gases, and can be used for lifting any kind of non-corrosive liquids.
MATERIAL: Carbon steel
SIZES: DN 80 x 50
CONNECTIONS:
Flanged EN PN16
Flanged ASME Class 150
Threaded ISO 7 Rp
MAX. MOTIVE PRESSURE: 10 bar
FLOW RATE CAPACITY: 6290 kg/h

PPO14
The ADCAMAT PPO (Pressure Operated Pump) is recommended in the transfer of high-temperature liquids such as condensate, oils and others, to a higher elevation or pressure. Under certain conditions, it can drain a closed vessel under vacuum or pressure. The pump can be operated by steam, compressed air or other gases, and can be used for lifting any kind of non-corrosive liquids.
MATERIAL: Carbon and stainless steel
SIZES: DN 25, DN 40 and DN 50
CONNECTIONS:
Flanged EN PN16
Threaded ISO 7 Rp
MAX. ALLOWABLE PRESSURE: 16 bar
MAX. MOTIVE PRESSURE: 10 bar
MAX. RELATED TEMPERATURE: 250 ºC
RATING: PN16