ADCA Packaged Equipment

ADCA PEquip – Packaged Units/Skids -Valsteam 2021-07-07T12:12:59+01:00

PACKAGED UNITS/SKIDS

Valsteam packaged units-skids - ecru

ECRU

The ADCAMAT ECRU series electric condensate recovery units are recommended in the transfer of high-temperature water such as hot condensate, to a higher elevation or pressure. This condensate is usually used as boiler feedwater. The standard models are prepared for flows up to 20 m3/h, or higher on request. The units are composed of a condensate vessel (receiver), a metallic support frame, electric pumps, level controls, valves, prewired control panel and pipework for connections between the different elements of the units.

valsteam packaged units-skids - ecruv

ECRUV

The ADCAMat ECRUV series electric condensate recovery units are recommended in the transfer of high-temperature water such as hot condensate, to a higher elevation or pressure. This condensate is usually used as boiler feedwater. The standard models are prepared for flows up to 4 m³/h. The units are composed of a vertical condensate vessel (receiver), a metallic support frame, electric pump, level controls, valves, prewired control panel and pipework for connections between the different elements of the units.

valsteam packaged units-skids - pwhu

PWHU-WAVE

A complete system conceived for instant production of heated water using steam as primary fluid. Ready to work, just needs the connections to the respective fluids. This system is ideal whenever there is enough energy available for instant heating.

valsteam packaged units-skids - freco

FRECO

The ADCATtherm FRECO – flash steam heat recovery unit – is a skid mounted package unit to facilitate heat recovery from flash steam, condensate or both. The Freco is especially recommended for heating a continuous flow of fluid, such as make-up water to a boiler feedwater system. Non-continuous flow applications may require additional recirculation, relief valves, or other devices, to avoid system damage due to overheating and consequent overpressure.

valsteam packaged units-skids - mli

MLI

The MLI series of bypass type magnetic level indicators were designed for continuous level indication and/or control in ADCA ECRU units and other special SKID mounted packages.  
The indicators can be equipped with multiple MSB reed switches for alarm purposes or a side mounted level transmitter for continuous level monitoring.