- ADCAMAT PUMPS AND PUMP TRAPS
- HUMIDITY SEPARATORS
- SAMPLE COOLERS
- DIRECT STEAM HUMIDIFIERS
- STEAM INJECTORS
- STEAM/WATER MIXERS
- PACKAGED UNITS/SKIDS
- ADCATHERM HEAT EXCHANGERS
- BOILER HOUSE EQUIPMENT
- COMPLEMENTARY EQUIPMENT
STEAM INJECTORS
SI20
The SI20 series steam injectors from ADCA are condensate injectors. They ensure low noise and vibration and rapid heating of still or flowing fluids in basins and vessels due to direct steam injection.
SIZES: 3/4”
CONNECTIONS: Female screwed ISO 7/1 Rp
MAX. OPERATING PRESSURE: 8,5 bar
MAX. OPERATING TEMPERATURE: 180 ºC
SI115
The SI series steam injectors from ADCA are condensate injectors. They ensure low noise and vibration and rapid heating of still or flowing fluids in basins and vessels, due to direct steam injection. Steam enters through the inlet housing, passes along the center of the heater, mixing with the cool water, which is drawn in through radial holes.
MATERIAL: Austenitic stainless steel
SIZES: 1/2”
CONNECTIONS: Threaded ISO 7 Rp
MAX. OPERATING PRESSURE: 17 bar
MAX. OPERATING TEMPERATURE: 95 ºC
RATING: PN 25
SI125 -SI140
The SI series steam injectors from ADCA are condensate injectors. They ensure low noise and vibration and rapid heating of still or flowing fluids in basins and vessels, due to direct steam injection. Steam enters through the inlet housing, passes along the center of the heater, mixing with the cool water, which is drawn in through radial holes.
MATERIAL: Austenitic stainless steel
SIZES: 1” and 11/2”
CONNECTIONS: Threaded ISO 7 Rp
MAX. OPERATING PRESSURE: 17 bar
MAX. OPERATING TEMPERATURE: 95 ºC
RATING: PN25