PRESSURE TRANSMITTERS
Smart pressure transmitter APC-2000ALW
Display with backlight
Programmable range, zero shift, characteristic and damping ratio with local panel keys
Smart pressure transmitters are applicable to the measurement of the pressure, underpressure and absolute pressure of gases, vapours and
liquids. The active sensing element is a piezoresistant silicon sensor separated from the medium by a diaphragm and by specially selected type
of manometric liquid. The casing is made of aluminium alloy cast or 316SS stainles steel, degree of protection IP66/IP67. The design of the
casing enables the use of a local display, rotation of the display, rotation of the casing by 0–340° relative to the sensor, and a choice of cable
direction.
4…20 mA, 0…20 mA or 0…5 mA output signal + HART protocol
Display with backlight
Programmable range, zero shift, characteristic and damping ratio with local panel keys
SIL 2 certificate
Intrinsic safety certificate (ATEX, IECEx)
Explosion proof certificate (ATEX, IECEx)
Marine certificate – DNV, BV
PED Conformity 2014/68/EU
Accuracy 0,075% (0,05% on request)
Gold plated diaphragm (Au)
MID (Measuring Instruments Directive) – certificate acc. to 2004/22/WE directive and OIML R140:2007 recommendations.
PCE-28.SMART
PCE-28.SMART pressure transmitter is applicable to the measurement of the pressure, underpressure and absolute pressure
of gases, vapours and liquids. The active sensing element is a piezoresistant silicon sensor separated from the medium by
a diaphragm and by specially selected type of manometric liquid.
4…20 mA output signal + HART protocol
Intrinsic safety certificate (ATEX, IECEx)
Explosion proof certificate (ATEX, IECEx)
Accuracy 0.1%
Marine certificate – DNV, BV
PCE-28.SMART/EXD
PCE-28.SMART pressure transmitter is applicable to the measurement of the pressure, underpressure and absolute pressure
of gases, vapours and liquids. The active sensing element is a piezoresistant silicon sensor separated from the medium by
a diaphragm and by specially selected type of manometric liquid.
4…20 mA output signal + HART protocol
Accuracy 0.1%
NACE compatibility
Measuring range up to 1380bar
PCE-28
The PCE-28 pressure transmitter is applicable to the measurement of the pressure, underpressure and absolute pressure of gases, vapours and liquids. The active sensing element is a piezoresistant silicon sensor separated from the medium by a diaphragm and by specially selected type of manometric liquid. The electronics is placed in a casing with a degree of protection from IP 65 to IP 68, depending
on the type of electrical connection applied.
Any range from 0…25 mbar up to 0…1000 bar
4 ÷ 20 mA two-wire or 0 ÷ 10 V output
Intrinsic safety certificate (ATEX, IECEx)
Explosion proof certificate (ATEX, IECEx)
Low-voltage version with ATEX and IECEx certificate (model PC-29A, PC-29B)
Marine certificate – DNV, BV
Communication protocol Modbus RTU
Gold plated diaphragm
SIL 1 certificate
Version with local display
PCE-28/EXD
The PCE-28 pressure transmitter is applicable to the measurement of the pressure, underpressure and absolute pressure of gases, vapours and liquids.The active sensing element is a piezoresistant silicon sensor separated from the medium by a diaphragm and by specially selected type of manometric liquid.The electronics is placed in a casing with a degree of protection from IP 66 to IP 68.
Potentiometers for zero and span adjustment
Accuracy 0,4%
Measuring ranges: 0 ÷ 1; 0 ÷ 2,5; 0 ÷ 6; 0 ÷ 10; 0 ÷ 16; 0 ÷ 25
Output signal 4 ÷ 20 mA or 0 ÷ 10 V
Process connection 1/2”NPTM, G1/2″, M20×1,5, RG or RM
The transmitters PCE-28.Modbus have two operating modes, configuration mode and Modbus mode. The configuration mode
is used for changing settings and detailed diagnostics of the transmitter. In this mode you can also activate a current loop
compatible with a 4-20 mAcurrent output.
Digital communication protocol Modbus RTU
Intrinsic safety and explosion proof certificates (ATEX, IECEx)
Accuracy 0.1%
The PC-29A and PC-29B pressure transmitters are applicable to the measurement of the pressure, underpressure and absolute pressure
of gases, vapours and liquids. The active sensing element is a piezoresistant silicon sensor separated from the medium by a diaphragm
and by specially selected type of manometric liquid. The electronics is placed in a casing with a degree of protection from IP 65 to IP 68,
depending on the type of electrical connection applied.
Any range from 0…25 mbar up to 0…1000 bar
Intrinsic safety certificate (ATEX, IECEx)
The pressure transmitter AS is applicable to measurement the pressure of gases vapours and liquids. It may be applied in water supply systems and heat engineering.
Any range from 0…25 mbar up to 0…1000 bar
Intrinsic safety certificate (ATEX, IECEx)
The APCE-2000 pressure transmitter is applicable to the measurement of the pressure, underpressure or absolute pressure
of gases, vapours and liquids. The active sensing element is a piezoresistant silicon sensor separated from the medium by
a diaphragm and by specially selected type of manometric liquid.
4…20 mA output signal + HART protocol
ATEX Intrinsic safety
Accuracy 0.1%
Rangeability 100:1
Gold plated diaphragm (Au)