Vibration Analyzers
The device provides a number of advantages that make it a useful and effective tool for monitoring and diagnosing equipment:
- Measurement of vibration velocity, vibration displacement and vibration acceleration, which allows obtaining complete information about the vibration state of the equipment.
- Spectral analysis of vibration (fast Fourier transform) to determine the types of defects, which allows you to accurately determine the cause of vibration.
- Analysis of the time signal to obtain information about the duration of vibration pulses and fractional frequencies.
- Display RMS and peak vibration values for accurate vibration status.
- Optical tachometer for measuring rotational speed, which simplifies the process of measuring equipment parameters.
- Determining the phase angle to obtain information about the temporal characteristics of vibration.
- Acceleration/Coasting measurement to obtain information about the dynamic characteristics of the equipment.
- Dynamic balancing in the supports (up to 4 correction planes), which increases the accuracy of measurements and improves equipment performance.
- Possibility to obtain vibration trends using specialized software, which allows early detection of deviations from the norm and take measures to prevent breakdowns.
- Built-in rechargeable battery for offline operation.
Easy and intuitive control, which simplifies the process of working with the device. - Dust and moisture-proof design of the keyboard, display and connectors to protect the device from external factors.
The bright display for convenience of work with the device in various lighting conditions.
Vibration Analyzer ADL-MS32
ADL-MS32 – vibration measurement and analysis on the 1st channel, rotational speed measurement and balancing possibility.
Application of the device
It can be used to diagnose various types of machines and mechanisms such as pumps, compressors, fans, electric motors and others.
ADL-MS32 allows you to measure vibration parameters such as amplitude, frequency, speed, acceleration, etc. Using this data, you can determine the condition of the equipment and identify possible problems associated with its operation.
The device can also be used to measure the speed of mechanisms and carry out balancing. This allows you to determine how correctly and efficiently the equipment is working and reduce the likelihood of equipment failure.
The ADL-MS32 has a compact and user-friendly design that allows it to be used in a variety of environments and locations. In addition, the device has high measurement accuracy and reliability.
Built-in software makes the instrument easy and reliable to use, allowing easy data management and reporting.
Vibration measurement with a vibrometer is quick and without the need for preparatory work.
Vibration values measured at different points in time (for example, after a month) can be used to predict the increase in vibration and plan the timing of the next repairs. This can result in cost savings compared to scheduled repairs.
The measured values of the vibration analyzer can be used to diagnose defects in the unit using the spectral analysis of the signal. For example, key and “defective” lines on the spectrum can be used to determine the state of bearings, imbalance, misalignment and other defects.
The devices are widely used for real-time monitoring of the mechanical condition of equipment during operation, diagnostics, maintenance, and repair of various types of equipment, including bearings, gears, turbines, generators, fans, pumps, rotors, distribution installations, ball mills, rolling mills, reducers, conveyors, engines, blowers, and more. They can be used to monitor both entire structures and individual components.
The ADL-MS series vibration analyzers find application in various industries, including metallurgy, mechanical engineering, petrochemical, light and defense industries, thermal and nuclear power engineering, as well as in the maintenance of equipment for agricultural complexes, housing and communal services, and transport.
Features and functions of the device:
- Measurement of vibration velocity, vibration displacement and vibration acceleration;
- Non-contact temperature measurement;
- Optical tachometer for measuring rotational speed;
- Spectral vibration analysis (fast Fourier transform);
- Analysis of the time signal;
- Display of RMS and peak vibration values;
- Measurement in the acceleration/run-out mode;
- Possibility of obtaining vibration change trends using specialized software;
- Built-in battery;
- Easy and intuitive control;
- Dust and moisture-proof design of the keyboard, display and connectors;
- Bright display.
Vibration analyzer ADL-MS30
ADL-MS30 – vibration measurement and analysis on the 1st channel, rotational speed and non-contact temperature measurement.
ADL-MS30 is a device designed for measuring and analyzing vibration in equipment. The device can measure and analyze vibration on 1 channel, allowing for a more accurate determination of the causes of vibration and their elimination.
In addition, ADL-MS30 also provides the ability to measure the rotational speed of the equipment, which is also an important indicator for diagnosing the condition of the equipment.
The device is also equipped with a non-contact temperature measurement function, which allows for the prompt monitoring of equipment temperature and preventing overheating.
This device is a simple and reliable tool for measuring vibrations. The built-in software allows for easy data management and report generation, making the equipment monitoring process much easier.
Measuring vibrations with this vibrometer is quick and does not require any preparatory work.
One of the important features of the vibrometer is the ability to forecast vibration increase based on measured values over a certain period of time, such as a month. This allows for planning the timing of future repairs and significantly saving money compared to planned maintenance.
All these functions and capabilities make this vibrometer a very useful and necessary tool for monitoring the condition of equipment in various industrial sectors where reliable equipment operation needs to be ensured and accidents and breakdowns prevented. For example, in mechanical engineering, energy, mining and oil and gas industries, as well as in manufacturing.
The values measured by the vibration analyzer can be used to diagnose unit defects. To do this, a spectral analysis of the signal is used, which allows you to highlight the key and “defective” lines in the vibration spectrum. This allows you to determine the condition of the bearings, imbalance, misalignment and other defects that may occur in the operation of the equipment.
Spectral analysis is a signal analysis method in which the signal is broken down into frequency components, allowing the identification of individual frequency components that make up the vibration. The presence of key and defective lines on the spectrum allows determining the condition of equipment and diagnosing possible defects.
For example, if key and defective lines corresponding to bearings are found on the vibration spectrum, this may indicate their wear or malfunction. Similarly, the presence of lines corresponding to imbalance or misalignment may indicate these defects in the operation of the unit.
The main area of application for these devices is the operational monitoring of mechanical conditions during operation, diagnostics, technical servicing, and repair of equipment such as bearings, gears, turbines, generators, fans, pumps, rotors, distribution installations, ball mills, rolling mills, reducers, conveyors, engines, blowers, and many other types of equipment. They are applicable for monitoring both entire structures and individual elements.
The ADL-MS series vibration analyzers are used in metallurgy, mechanical engineering, petrochemical, as well as light and defense industries, thermal and nuclear power engineering, servicing equipment in agro-industrial complexes, housing and communal services, and transportation.
Features and functions of the device:
- Measurement of vibration velocity, vibration displacement and vibration acceleration: This device is capable of measuring all three vibration parameters, which allows for a comprehensive analysis of the condition of mechanisms and equipment.
- Vibration spectrum analysis (fast Fourier transform): This analysis allows you to determine the frequency content of the vibration signal, which allows you to identify deviations from the norm and make decisions about the need to repair or replace mechanisms.
- Time analysis of the signal: this analysis allows you to determine the nature of the vibration and its rate of change over time.
- Displaying RMS and peak values of vibration: The device can display information on the RMS and peak values of vibration, which allows understanding the level of vibration and monitoring its changes in real-time.
- Possibility of obtaining vibration change trends using specialized software: The device comes with software that allows tracking the dynamics of vibration changes and building graphs showing the dependency of parameters over time.
- Built-in battery: The device has a built-in battery that allows you to use it autonomously for a certain time, regardless of the power source
- Easy and Intuitive Operation: The operation of the instrument is easy and intuitive, allowing the operator to operate the instrument quickly and efficiently.
- Dust and moisture protection of the keyboard, display and connectors: The keyboard, display and connectors of the device are dust and moisture resistant, which allows the device to be used in high humidity conditions and provides protection against accidental dust ingress. This allows you to keep the device in good condition and increases its efficiency and duration. Also, when operating the device in conditions with high humidity, dust – moisture protection is an important feature that ensures safe and accurate operation of the device.
Vibration analyzer ADL-MS30L
It carries out measurements on 1 channel, allows you to determine the main parameters of vibration, such as amplitude, frequency and speed, as well as diagnose the state of mechanisms and equipment based on the received data.
Main field
The main field of application of the devices is the operational control of the mechanical condition during operation, diagnostics, maintenance and repair of equipment: bearings, gears, turbines, generators, fans, pumps, rotors, distribution plants, ball mills, rolling mills, gearboxes, conveyors, engines, blowers and many other equipment. Vibration analyzers of the MS series are applicable for monitoring both entire structures and individual elements.
The vibration analyzers of the MS series are used in metallurgy, mechanical engineering, petrochemical, light and defense industries, thermal and nuclear power engineering, maintenance of agricultural equipment, housing and communal services and transport.
The presence of a service center based on the Adelix company in Turkey, Ankara, provides the possibility of warranty and post-warranty service throughout the entire period of operation.
Vibration Analyzer ADL MS52
2 channels vibration analyzer – compact instrument with many functions for expert diagnosis of the vibration state and the causes of non-stationary equipment operation.
Features of vibration meter:
- 2 channels for measuring and evaluating the vibration spectrum
- Classic reliable piezo accelerometers
- Wide frequency range for high quality and professional diagnostics
- Preparation of reports in PDF format and other
- Large capacity flash drive for storing measurements and reports
- USB interface for PC connection
- Energy-intensive battery
- Measurement archiving and reporting software
- Intuitive interface
- Bright and color display.
Features of vibration meter:
- 2 channels for measuring and evaluating the vibration spectrum
- Classic reliable piezo accelerometers
- Wide frequency range for high quality and professional diagnostics
- Easy and precise shaft alignment
- Distance between sensors on alignment equipment – up to 10m
- Shaft diameter range 20 to 250 mm diameter with supplied chains
- Ultralight wireless laser sensors with built-in Bluetooth for alignment.
- Wide range of features including horizontal and vertical machine alignment, gasket simulator and thermal expansion calculation
- Preparation of reports in PDF format and other
- Large capacity flash drive for storing measurements and reports
- USB interface for PC connection
- Energy-intensive battery
- Measurement archiving and reporting software
- Intuitive interface
- Bright and color display.
Main field
The main field of application of the devices is the operational control of the mechanical condition during operation, diagnostics, maintenance and repair of equipment: bearings, gears, turbines, generators, fans, pumps, rotors, distribution plants, ball mills, rolling mills, gearboxes, conveyors, engines, blowers and many other equipment. Vibration analyzers of the MS series are applicable for monitoring both entire structures and individual elements.
The vibration analyzers of the MS series are used in metallurgy, mechanical engineering, petrochemical, light and defense industries, thermal and nuclear power engineering, maintenance of agricultural equipment, housing and communal services and transport.
The presence of a service center based on the Adelix company in Turkey, Ankara, provides the possibility of warranty and post-warranty service throughout the entire period of operation.
Vibration Analyzer ADL MS52PRO
2 channels vibration analyzer with laser alignment function – compact instrument with many functions for expert diagnosis of the vibration state and the causes of non-stationary equipment operation.
Features of vibration meter:
- 4 channels for measuring and evaluating the vibration spectrum
- Classic reliable piezo accelerometers
- Wide frequency range for high quality and professional diagnostics
- Preparation of reports in PDF format and other
- Large capacity flash drive for storing measurements and reports
- USB interface for PC connection
- Energy-intensive battery
- Measurement archiving and reporting software
- Intuitive interface
- Bright and color display.
Main field
The main field of application of the devices is the operational control of the mechanical condition during operation, diagnostics, maintenance and repair of equipment: bearings, gears, turbines, generators, fans, pumps, rotors, distribution plants, ball mills, rolling mills, gearboxes, conveyors, engines, blowers and many other equipment. Vibration analyzers of the MS series are applicable for monitoring both entire structures and individual elements.
The vibration analyzers of the MS series are used in metallurgy, mechanical engineering, petrochemical, light and defense industries, thermal and nuclear power engineering, maintenance of agricultural equipment, housing and communal services and transport.
The presence of a service center based on the Adelix company in Turkey, Ankara, provides the possibility of warranty and post-warranty service throughout the entire period of operation.
Vibration Analyzer ADL MS54
4 channels vibration analyzer – compact instrument with many functions for expert diagnosis of the vibration state and the causes of non-stationary equipment operation.
Features of vibration meter:
- 4 channels for measuring and evaluating the vibration spectrum
- Classic reliable piezo accelerometers
- Wide frequency range for high quality and professional diagnostics
- Easy and precise shaft alignment
- Distance between sensors on alignment equipment – up to 10m
- Shaft diameter range 20 to 250 mm diameter with supplied chains
- Ultralight wireless laser sensors with built-in Bluetooth for alignment.
- Wide range of features including horizontal and vertical machine alignment, gasket simulator and thermal expansion calculation
- Preparation of reports in PDF format and other
- Large capacity flash drive for storing measurements and reports
- USB interface for PC connection
- Energy-intensive battery
- Measurement archiving and reporting software
- Intuitive interface
- Bright and color display.
Main field
The main field of application of the devices is the operational control of the mechanical condition during operation, diagnostics, maintenance and repair of equipment: bearings, gears, turbines, generators, fans, pumps, rotors, distribution plants, ball mills, rolling mills, gearboxes, conveyors, engines, blowers and many other equipment. Vibration analyzers of the MS series are applicable for monitoring both entire structures and individual elements.
The vibration analyzers of the MS series are used in metallurgy, mechanical engineering, petrochemical, light and defense industries, thermal and nuclear power engineering, maintenance of agricultural equipment, housing and communal services and transport.
The presence of a service center based on the Adelix company in Turkey, Ankara, provides the possibility of warranty and post-warranty service throughout the entire period of operation.
Vibration Analyzer ADL MS54 PRO
4 channels vibration analyzer with laser alignment function – compact instrument with many functions for expert diagnosis of the vibration state and the causes of non-stationary equipment operation.
