Belt Alignment Instruments

Belt Alignment Instruments 2020-07-03T16:49:23+01:00

BELT ALIGNMENT INSTRUMENTS

Belt Alignment Instruments

We have a complete range of professional tools for belt transmission alignment (BTA). Choose between “visual” display on targets or digital display. Regardless which one you choose, the result is reduced pulley, belt, bearing and seal wear. Vibration levels are also reduced. Increased efficiency also means lower energy costs. For these reasons, a belt alignment system normally pays for itself within a few months, regardless of which model you choose.

Shaft Alignment Instruments

There is an Easy-Laser® shaft alignment system for every situation and industry, from the most simple to the most advanced, and for use in potentially explosive environments. All systems are designed to be easy to mount on the machines. Vital components are made of aluminium and stainless steel to guarantee reliable measurement values and the highest reliability in even the toughest of environments.

Geometric Alignment Instruments

Geometric measurement technology spans an extremely wide field. From relatively simple straightness measurements of a member to considerably more complicated right angle measurements of machine tools and checks of turbines for power generation. The Easy-Laser® systems are excellent for taking all these types of measurements quickly and easily.

XT190 Belt Alignment System

Wireless and digital tool for alignment of sheaves/​pulleys

When aligning with the Easy-Laser® XT190 you reduce the wear on sheaves/pulleys, belts, bearings and seals, and you also get lower noise and vibration levels. The accuracy of the digital readout means that you can align within prescribed tolerances and rely on the result. Especially transmissions with two or more belts, or wide belts, are highly affected by misalignment, causing large differences in belt tensions and also increased wear and tear on edges.

The Easy-Laser® XT190 allows even more accurate and efficient alignment of sheaves/pulleys, and is unique to the market in being able to offer digital read off. The transmitter generates a laser plane parallel to the reference sheave. The detector reads the position in relation to the laser plane and provides a live digital display of both offset and angular value. This makes the alignment of the adjustable machine very simple. The accuracy of the digital readout also means that you can align within prescribed tolerances and rely on the result. 

Many read-out options

Follow the adjustment on the integrated OLED display, in the free XT Alignment app on your phone or tablet, or on a separate Easy-Laser display unit*. The machine’s shim and adjustment values are automatically calculated. It is also possible to read off visually on targets (included).

With the XT11 display unit or mobile device, it is easy to save the data and create a PDF report.

Accurate and easy to use

Compared with old methods such as rulers, the alignment is more accurate and efficient when both horizontal and vertical adjustment is carried out at the same time. In addition, the work can be performed by one person alone, in a significantly shorter time. 

Fits all types of sheaves/pulleys

The XT190 is mounted on the sheave/pulley using super magnets. It can be used on all types of sheaves/pulleys, such as v-belt, timing belt, flat belt and chain drives. If you have aluminum sheaves/pulleys, the low weight of the tool means that it can be attached using strong double-sided tape.

* Can be used with E or XT series display units (not included).

Measurement programs

5 read-out options!

Targets

Aligned when laser hits both target slots.

Built-in display

Offset (mm or inch)
Horizontal angle
Vertical angle

iOS and Android

Download the Easy-Laser XT Alignment App and use your phone or tablet as display unit.
See list of compatible devices.

E51 and E52 display unit*

Full graphic interface with possibility to document the result.

* Display unit not included.

XT11 Display unit*

Full graphic interface with possibility to document the result.

* Display unit not included.

Smart functions

 
Multiple languages