BW Technologies Portable Gas Detectors
Mono And Multi Gas Disposable
BWClip
Disposable (24 months life time) portable single gas detectors for personal safety, available for O2 (Oxygen), CO (Carbon Monoxide), H2S (Hydrogen Sulfide) and SO2 (Sulfur Dioxide). Also abailable with 36 months life time (only CO and H2S)
BW Clip Series
Maintenance-Free Single-Gas Detectors
The most user-friendly, reliable and cost-effective way to ensure safety, compliance and productivity.
The BW Clip Series of single-gas detectors provides up to three years maintenance-free operation: Just turn on the device and it runs continuously — no need for calibration, sensor replacement, battery replacement or battery charging. That means great reliability and no
downtime.
Plus, with the two-year version for H2S or CO, you can put the device in a hibernation case when you’re not using it for a week or more — and extend its life by that period of time.
Choose from two detectors; both of which are compact, lightweight and easy to handle, while tough enough for harsh environments and extreme temperatures:
• BW Clip – provides standard operation and no calibration
• BW Clip Real Time – includes a real-time gas level display and the ability to calibrate the device.
Both detectors are compatible with the IntelliDoX instrument management system.
Use our unique advanced technology for safety, compliance and productivity.
• Surecell™: unique dual reservoir sensor design dramatically improves instrument performance, response time, and longevity compared to traditional electrochemical sensors and consistently delivers reliable instrument performance under the harshest environmental conditions
• Reflex Technology™: advanced automated self-test function routinely checks the operating condition of the sensor to increase safety, up-time, and overall worker confidence
• IntelliDoX: instrument management system
• The quickest bump test in the industry
• Configuration of alarm set points and more
• Performing different tests for up to five BW Clip detectors at once — for maximum productivity
• Easy and accurate record-keeping
Configurable Options:
• Configuration of high and low alarm set points before the device is activated
• Adjustment of alarm set points and other parameters as needed throughout the lifespan
• Option to enable the noncompliance indicator, which flashes red when a bump test is due or a gas event occurs
• Option to display gas reading during alarm (BW Clip only)
• User settable bump test reminder
• User settable calibration reminder (BW Clip Real Time only)
• Option to display the Real Time Clock
BW CLIP SERIES SPECIFICATIONS
SIZE- 1.6 x 2.0 x 3.4 in. / 4.1 x 5.0 x 8.7 cm
WEIGHT- 3.2 oz. / 92 g
TEMPERATURE-
H2S: -40 to +122°F /-40 to +50°C
CO: -22 to +122°F /-30 to +50°C
O2: -4 to +122°F /-20 to +50°C
SO2: -22 to +122°F /-30 to +50°C
HUMIDITY- 5% – 95% RH (non-condensing)
ALARMS- Visual,vibrating, audible (95 dB) • Low, High
TESTS- Activated detectors automatically performone internal diagnostic test every 24 hours
TYPICAL BATTERY LIFE- Two years(H2S, CO, O2 or SO2) or three years(H2S or CO) depending on the version
EVENT LOGGING- 35most recent events
INGRESS PROTECTION- IP 66/67
CERTIFICATIONS AND APPROVALS-
ClassI, Div. 1, Gr. A, B, C, D.
ClassI, Zone 0 , Gr. IIC
ATEX: II 1G Exia IIC T4 Ga
IECEx: Exia IIC T4 Ga
European Conformity
American Bureau of Shipping
CU TR Ex(Customs Union)
WARRANTY-
Two or three years from activation (given normal operation), plus one year shelf life (6 months for O2). Up to three years for two-year H2S and CO detectors when used with the hibernation feature, limited to 24 months of detector operation.
SENSOR SPECIFICATIONS
GAS MEASURING RANGE LOW ALARM LEVEL HIGH ALARM LEVEL
2 OR 3 YEAR DETECTOR
H2S 0 -100 ppm 10 ppm 15 ppm
CO 0 – 300 ppm 35 ppm 200 ppm
2 YEAR DETECTOR
O2 0 – 25.0 % byvol. 19.5 % 23.5 %
SO2 0 – 100 ppm 5 ppm 10 ppm
ALARM SETPOINTS ARE USER ADJUSTABLE BEFORE AND AFTER ACTIVATING THE DETECTOR.
SET POINTS SHOWN ARE MOST COMMON DEFAULT VALUES. ADDITIONAL DEFAULT VALUES ARE AVAILABLE.
FEATURES & BENEFITS
•Maintenance-free: no sensor or battery changes necessary
• Compact, lightweight design with one-button operation
• Designed for a range of harsh environments and extreme temperatures
• Hibernation mode with case accessory or IntelliDoX
• Automated self-test of battery, sensor and electronics
• Wide-angle flash, which alerts simultaneously with audible and vibrating alarm
• Automatic logging of the 35 most recent gas events and bump test results
• Affordable, with low cost of ownership
• Device Management with Honeywell SafetySuite
Optional Accessories
• Hibernation Case
• Hard Hat Clip
• IntelliDoX instrument management system
For a complete list of kits and accessories, please see accessories page.
BWClip4
BW Clip4 Multi-Gas Detector 4 gases: O2 (Oxygen), LEL (flammable gases with IR sensor), CO (Carbon Monoxide) and H2S (Hydrogen Sulfide).
Always On: 2-Years Continuous Runtime. Once activated, it is assured that the BW Clip4 is always on. Two years of non-stop runtime with no charging or battery swap outs.
Honeywell BW™ Clip4 Multi-Gas Detector.
Hydrogen Sulfide
Carbon Monoxide
Oxygen
Combustible Gases
It’s ON.
The simplicity of “always on.” The safety and quality of Honeywell.
When you’ve got your hands full in the field, you need no‑hassle gas detection you can count on: the Honeywell BW™ Clip4 four-gas detector.
Wearable, easy multi-gas detection that’s always on. No charging, no battery or sensor replacements, no hassle.
Simpler, low cost of ownership guaranteed by the Honeywell commitment to quality, and backed by a full ecosystem of supporting technologies.
When you clip on the Honeywell BW™ Clip4 you know – it’s on.
Always On: 2-Year Continuous Runtime
Once activated, you can rest assured that the Honeywell BW™ Clip4 is always on. Two years of non-stop runtime with no charging or battery swap outs.
TECHNICAL SPECIFICATIONS
SIZE- 12.0 x 6.8 x 3.2 cm / 4.7 x 2.7 x 1.3 in.
WEIGHT- 233 g / 8.2 oz.
OPERATING TEMPERATURE: -20 to +50°C / -4 to +131°F
HUMIDITY- 5 – 95% RH (non-condensing) continuous
INGRESS PROTECTION- IP68
ALARMS AND TYPE- Visual, vibrating, audible (95 dB); Low, High, TWA, STEL, OL (over limit)
SELF-TEST- Activated detectors automatically perform one internal diagnostic test every 24 hours (sensors, battery, and circuitry).
TYPICAL BATTERY LIFE- Two years, continous operation
EVENT LOGGING- 70 most recent events
USER OPTIONS-
• Adjust STEL period (5-15 minutes in 1 minute intervals)
• Calibration span levels
• Calibration interval
• Bump test interval
• Select combustible gases measurement: 0-100% LEL
(Lower Explosive Limit) or Methane gas 0-5.0% v/v
• Calibration due date (1 to 365 days, or set to zero for off)
• Individual sensor enable/disable
• Latching alarms
• Stealth mode
CERTIFICATIONS AND APPROVALS-
Class I, Div 1, Group A, B, C, D
Class I, Zone 0, Group IIC
ATEX: II 1G Ex ia IIC T4 Ga
IECEx: Ex ia IIC T4 Ga
Conforms to all applicable European directives.
WARRANTY- Full two-year warranty including sensors and battery
SENSOR SPECIFICATIONS
GASES RANGE RESOLUTION
HYDROGEN SULFIDE (H2S) 0 – 100 ppm 1 / 0.1 ppm
CARBON MONOXIDE (CO) 0 – 1,000 ppm 1 ppm
OXYGEN (O2) 0 – 25% vol. 0.1% vol.
COMBUSTIBLE GASES (LEL)* 0 – 100% LEL 1% LEL
* Caution – the LED IR combustible gas sensor used in Honeywell BW™ Clip4 cannot detect certain combustible gases including hydrogen and acetylene.
The application should be reviewed to ensure the Honeywell BW™ Clip4 can provide adequate detection.
FEATURES & BENEFITS
Easy to Wear
• Durable, ergonomic and wearable — doesn’t weigh you down
• Compact profile — even working in tight spaces, you won’t know you are wearing it
Easy to Use
• Simple one-button operation
• User-friendly tamper-proof operation with just one button
• Intuitive LCD icons
• Real-time gas concentrations shown on LCD
Easy Compliance
• Flashing red non-compliance indicators warn workers that the detector has not been bump tested according to schedule
• Daily full function self-test of sensors, battery status, circuit integrity, and audible/visual alarms
Easy to Manage
• Compatible with IntelliDoX docking system and instrument management system
Easy to Rely On
• Built-in concussion proof boot
• Tested to last in extreme environments
COLORIMETRIC TUBES
Honeywell colorimetric gas detection tubes enable quick, on-the-spot measurement of a wide range of toxic and combustible gases and vapours.
Wide assortment of tubes available to detect over 300 gases and vapours. Easy to use, even in multiple layers of gloves. Easy-to-read with sharp, clear colour change. No calibration or other maintenance required.
Colorimetric Gas Detection Tubes and Pump
On-the-spot, compound-specific
measurement of gases
and vapours
Honeywell colorimetric gas detection tubes enable quick, on-the-spot measurement of a wide range of toxic and combustible gases and vapours.
Key Features-Colorimetric Tubes
• Wide assortment of tubes available to detect
over 300 gases and vapours
• Easy to use, even in multiple layers of gloves
• Easy-to-read with sharp, clear colour change
• No calibration or other maintenance required
Key Features-Hand Pump (H-LP-1200)
(Piston Hand Pump Kit Part Number: H-010-0001-000)
• Ergonomic, durable hand pump
• Solid metal construction with lifetime warranty
• Springless piston design accurately draws 50 or 100 cc volumes
Typical Applications
• Oil and gas
• Chemicals and petrochemicals
• Agriculture and pest control
• Food and beverage production
• Environmental protection
• Fire service
• HazMat response
• National security
FEATURES & BENEFITS
Honeywell tubes are easy to read, and provide a sharp, clear colour change directly corresponding to the concentration of gas present.
Honeywell tubes are compatible with the Honeywell piston hand pump, a reliable way to draw samples of an exact volume required for the most accurate measurements.
• Quick, accurate, low-cost measurements
• Easy to read, with sharp, clear colour change
• No calibration needed