Transmitters

Transmitters 2022-05-18T12:02:31+01:00

Transmitters

Spriano transmitter MTLG

MTLG

MTLG series SMART visual reed transmitters are microprocessor based instruments that combine the 4-20mA+ HART® signal advantages (4-20mA) together with the convenience of local visualization of measurement by means of graduated scale.

Spriano transmitter SET45

SET45

SET45 Series is two-wire microprocessor-based, 4-20 mA instrument. The thick film ceramic sensor can measure gauge or absolute pressure with ranges of 0,2 to 460 bar.

SET46

The sensor, protected from the process fluid by diaphragm, generates a signal corresponding to the actual pressure and is complete with a PTC thermistor which also transmits the temperature of the measuring cell to the electronic system. On the basis of these two values and of the configured parameters the electronic system generates a standard output signal (4 to 20mA, two wires system) and displays all the necessary data on the LCD display. The operating parameters can be changed by means of the two push buttons that are below the LCD display.

Spriano transmitter SET47B

SET47B

The transmitter SET47B measures a differential pressure in spans between 1,8 and 21000mbar with a static pressure up to 200bar. The pressure measuring element is a piezoresistive sensor. It is possible to choose between sensors to satisfy the process conditions. The sensor generates a signal corresponding to the actual pressure and is complete with a PTC thermistor which also transmits the temperature of the measuring cell to the electronic system.

Spriano transmitter SET47BL

SET47BL

The transmitter SET47BL measures a liquid level head in spans between 35 and 10500mbar also with a static pressure. The pressure measuring element is a piezoresistive sensor. It is possible to choose between sensors to satisfy the process conditions. The sensor generates a signal corresponding to the actual pressure and is complete with a PTC thermistor which also transmits the temperature of the measuring cell to the electronic system.

Spriano transmitter SET49B

SET49B

The transmitter SET49B measures levels of liquids in open tanks at atmospheric pressure. The SET49 comprises two main elements: the immersion pressure sensor and the electronic module connected by a cable of variable length. The sensor generates a signal corresponding to the hydrostatic pressure and it is complete with a PTC thermistor which also transmits the temperature of the measuring cell to the electronic system.

SSPT

SSPT pressure transmitters with piezoresistive or ceramic sensor, have as peculiar characteristics, robustness, simplicity and many different shapes.

Spriano transmitter SST50

SST50

The transmitter series SST50 measures liquid levels, density and interface levels in closed or open vessels. It converts buoyant force exerted by a displacer immersed in a liquid to a proportional current signal thanks to a mechanical forces transmission device based on a torque tube and a piezoresistive sensor.

SST50-REM

SST50-REM series includes 4÷20mA loop powered field digital indicators for ATEX Exia or not ATEX applications. The configuration and calibrations are performed locally through the use of buttons and display.

SST51

Inside the float is placed a magnet which drives, without contact, reed contacts located inside a pipe that can itself be the guide of the float. Moving along its guide pipe, the float changes the reed contact status.

SST52

The SST52 transmitters are able to accept 3 wires Pt 100 ohm resistance thermometers and total accuracy is depending on class of the sensors utilized such as DIN A, DIN B, 1/4 DIN, 1/10 DIN, etc.

Spriano transmitter SST55

SST55

SST55 series SMART pressure transmitters are microprocessor based Instruments that combine the analog signal advantages (4-20mA) together with the flexibility of digital communication using HART® or protocol. They can be remotely configured by a universal hand held terminal (HHT) or by a PC with a dedicated interface. Moreover, it Is possible to locally configure the instruments (zero and span) by means of 4 push buttons and to display the data on the wide LCD display.

Spriano transmitter SST56

SST56

SST56 series SMART pressure transmitters are microprocessor based instruments that combine the analog signal advantages (4-20mA) together with the flexibility of digital communication using HART® protocol. They can be remotely configured by a universal hand held terminal (HHT) or by a PC with a dedicated interface. Moreover, it is possible to locally configure the instruments (zero and span) by means of 4 push buttons and to display the data on the wide LCD display.

Spriano transmitter SST57B

SST57B

SST57B series SMART differential pressure transmitters are microprocessor-based instruments that combine the analog signal advantages (4-20mA) together with the flexibility of digital communication using HART® protocol. They can be remotely configured by a universal hand held terminal (HHT) or by a PC with a dedicated interface. Moreover, it is possible to locally configure the instruments (zero and span) by means of 4 push buttons and to display the data on the wide LCD display.

SST57BL

SST57BL series SMART level transmitters are microprocessor based instruments that combine the analog signal advantages (4-20mA) together with the flexibility of digital communication using HART® protocol. They can be remotely configured by a universal hand held terminal (HHT) or by a PC with a dedicated interface. Moreover, it is possible to locally configure the instruments (zero and span) by means of 4 push buttons and to display the data on the wide LCD display.

Spriano transmitter SST59B

SST59B

SST59B series SMART level transmitters are microprocessor based instruments that combine the analog signal advantages 4-20mA together with the flexibility of digital communication using HART® protocol. They can be remotely configured by a universal hand held terminal (HHT) or by a PC with a dedicated interface. Moreover, it is possible to locally configure the instruments (zero and span) by means of 4 push buttons and to display the data on the wide LCD display. The transmitter SST59B measures levels of liquids in open tanks at atmospheric pressure.

Spriano transmitter SST70

SST70

The transmitter series SST70 measures liquid levels, density and interface levels in closed or open vessels. It converts buoyant force exerted by a displacer immersed in a liquid to a proportional current signal thanks to a mechanical forces transmission device based on a torque tube and a piezoresistive sensor.

SST70-REM

SST70-REM series includes 4÷20mA loop powered field digital indicators for ATEX Exd applications. The configuration and calibrations are performed locally through the use of buttons and display.

Spriano transmitter SST71

SST71

Inside the float is placed a magnet which drives, without contact, reed contacts located inside a pipe that can itself be the guide of the float. Moving along its guide pipe, the float changes the reed contact status.

SST72

SST72

Inside the float is placed a magnet which drives, without contact, reed contacts located inside a pipe that can itself be the guide of the float. Moving along its guide pipe, the float changes the reed contact status.

SST75

SST75

SST75 series SMART pressure transmitters are microprocessor based Instruments that combine the analog signal advantages (4-20mA) together with the flexibility of digital communication using HART® or protocol. They can be remotely configured by a universal hand held terminal (HHT) or by a PC with a dedicated interface. Moreover, it Is possible to locally configure the instruments (zero and span) by means of 4 push buttons and to display the data on the wide LCD display.

SST76

SST76 series SMART pressure transmitters are microprocessor based instruments that combine the analog signal advantages (4-20mA) together with the flexibility of digital communication using HART® protocol. They can be remotely configured by a universal hand held terminal (HHT) or by a PC with a dedicated interface. Moreover, it is possible to locally configure the instruments (zero and span) by means of 4 push buttons and to display the data on the wide LCD display.

SST77B

SST77B

SST77B series SMART differential pressure transmitters are microprocessor-based instruments that combine the analog signal advantages (4-20mA) together with the flexibility of digital communication using HART® protocol. They can be remotely configured by a universal hand held terminal (HHT) or by a PC with a dedicated interface. Moreover, it is possible to locally configure the instruments (zero and span) by means of 4 push buttons and to display the data on the wide LCD display.

SST77BL

SST77BL

SST77BL series SMART level transmitters are microprocessor based instruments that combine the analog signal advantages (4-20mA) together with the flexibility of digital communication using HART® protocol. They can be remotely configured by a universal hand held terminal (HHT) or by a PC with a dedicated interface. Moreover, it is possible to locally configure the instruments (zero and span) by means of 4 push buttons and to display the data on the wide LCD display.

SST79B

SST79B series SMART level transmitters are microprocessor based instruments that combine the analog signal advantages 4-20mA together with the flexibility of digital communication using HART® protocol. They can be remotely configured by a universal hand held terminal (HHT) or by a PC with a dedicated interface. Moreover, it is possible to locally configure the instruments (zero and span) by means of 4 push buttons and to display the data on the wide LCD display. The transmitter SST79B measures levels of liquids in open tanks at atmospheric pressure.

TTS

TTS

The sensor transmitter TTS Series is equipped with a PT 100 W 0°C probe, and optionally provides a current signal output within the 4÷20mA range (2 wires system). It can be used in different applications such as, for example, for mounting on tank ships and in all the processes which requires an accurate temperature measurement.

TTT

TTT

The temperature sensor TTT Series is equipped with a Thermocouple probe, and optionally provides a current signal output within the 4÷20mA range (2 wires system).